| Assessment Year | 1989 |
|---|---|
| Principal Product | STONE-WASHED JEANS |
| NAICS |
n/a
|
| SIC | 2261: Finishers of Broadwoven Fabrics of Cotton |
| Sales Range | $10 M to 50M |
| # of Employees | 400 |
| Plant Area |
n/a
|
| Annual Production | 7,000,000
pieces
|
| Production Hrs. Annual | 7,292
hrs
|
| Location (State) | Texas |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $244,958 | 4,470,985 |
kWh
|
$0.055 |
| Natural Gas | $337,134 | 122,259 |
MMBtu
|
$2.76 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $41,516 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $11,172 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.8114: Change rate schedules or other changes in utility service | $28,911 | $6,400 |
$28,911
-
kWh
|
- | - | |
| 02 | 2.2135: Repair and eliminate steam leaks | $4,380 | $800 | - |
$4,380
-
MMBtu
|
- | |
| 03 | 2.6232: Install set-back timers | $3,860 | - |
$3,860
57,737
kWh
|
- | - | |
| 04 | 3.4154: Eliminate leaks in water lines and valves | $2,932 | $175 | - |
$700
-
MMBtu
|
$2,232 | |
| 06 | 2.4221: Install compressor air intakes in coolest locations | $900 | $800 |
$900
20,516
kWh
|
- | - | |
| 07 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $154 | $91 |
$154
2,345
kWh
|
- | - | |
| 08 | 2.7261: Install timers and/or thermostats | $285 | $83 |
$105
2,345
kWh
|
$180
-
MMBtu
|
- | |
| 09 | 2.8118: Check for accuracy of utility / power meters | $94 | $500 | - | - | $94 | |
| TOTAL RECOMMENDED | $41,516 | $8,849 |
$33,930
82,943
kWh
|
$5,260
-
MMBtu
|
$2,326 | ||
| TOTAL IMPLEMENTED | $11,172 | $975 |
$3,860
57,737
kWh
|
$5,080
-
MMBtu
|
$2,232 | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs