| Assessment Year | 1985 |
|---|---|
| Principal Product | REFINING GASKETS |
| NAICS |
n/a
|
| SIC | 3053: Gaskets, Packing, and Sealing Devices |
| Sales Range | $1 M to 5M |
| # of Employees | 35 |
| Plant Area |
n/a
|
| Annual Production | 0
units
|
| Production Hrs. Annual | 0
hrs
|
| Location (State) | Oklahoma |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $13,513 | 219,226 |
kWh
|
$0.062 |
| Natural Gas | $3,409 | 686 |
MMBtu
|
$4.97 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $1,679 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $1,652 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|
| 01 | 2.7261: Install timers and/or thermostats | $257 | $360 | - |
$257
-
MMBtu
|
|
| 02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $80 | $138 |
$80
1,465
kWh
|
- | |
| 03 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $720 | $200 |
$720
13,775
kWh
|
- | |
| 04 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $61 | - |
$61
1,172
kWh
|
- | |
| 05 | 2.6121: Reduce hot water temperature to the minimum required | $110 | - |
$110
2,052
kWh
|
- | |
| 06 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $258 | $139 |
$258
4,982
kWh
|
- | |
| 07 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $83 | $78 |
$83
1,465
kWh
|
- | |
| 08 | 2.6232: Install set-back timers | $83 | $45 |
$83
1,465
kWh
|
- | |
| 09 | 2.4221: Install compressor air intakes in coolest locations | $27 | $190 |
$27
586
kWh
|
- | |
| TOTAL RECOMMENDED | $1,679 | $1,150 |
$1,422
26,962
kWh
|
$257
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $1,652 | $960 |
$1,395
26,376
kWh
|
$257
-
MMBtu
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs