| Assessment Year | 1991 |
|---|---|
| Principal Product | LITHOGRAPH PLATES/ROLLS |
| NAICS |
n/a
|
| SIC | 2796: Platemaking and Related Services |
| Sales Range | $10 M to 50M |
| # of Employees | 91 |
| Plant Area |
n/a
|
| Annual Production | 38,500
thousand feet
|
| Production Hrs. Annual | 6,000
hrs
|
| Location (State) | Massachusetts |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $549,763 | 6,750,586 |
kWh
|
$0.081 |
| Natural Gas | $225,880 | 30,110 |
MMBtu
|
$7.50 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $29,196 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $29,196 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|
| 01 | 2.2443: Re-use or recycle hot or cold process exhaust air | $9,534 | $22,880 |
$(-3,509.0)
(-43,083)
kWh
|
$13,043
-
MMBtu
|
|
| 02 | 2.3212: Optimize plant power factor | $6,750 | $23,400 |
$6,750
-
kWh
|
- | |
| 03 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $6,673 | $8,000 |
$6,673
82,943
kWh
|
- | |
| 04 | 2.7261: Install timers and/or thermostats | $3,188 | $3,548 | - |
$3,188
-
MMBtu
|
|
| 05 | 2.4133: Use most efficient type of electric motors | $307 | $1,189 |
$307
3,810
kWh
|
- | |
| 06 | 2.2437: Recover waste heat from equipment | $1,800 | $590 | - |
$1,800
-
MMBtu
|
|
| 07 | 2.4221: Install compressor air intakes in coolest locations | $472 | $193 |
$472
5,862
kWh
|
- | |
| 08 | 2.6232: Install set-back timers | $472 | $398 |
$472
5,862
kWh
|
- | |
| TOTAL RECOMMENDED | $29,196 | $60,198 |
$11,165
55,394
kWh
|
$18,031
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $29,196 | $60,198 |
$11,165
55,394
kWh
|
$18,031
-
MMBtu
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs