The Tennessee Technological University Industrial Assessment Center (TT-ITAC) provides free energy, productivity, and waste assessments to small and medium-sized industrial facilities through funding provided by the US Department of Energy.
318 | Assessments |
2,305 | Recommendations |
4.49 | Tbtu Energy Saving* |
$52.14 | million Cost Savings* |
238 | Students Trained |
*Recommended Savings
Tennessee Technological University also coordinates activities with:
University of Memphis
Recent Case Studies
Related Papers & Publications
Nevills M. and Languri E., A Verification of Energy Savings in Air Compressors via Reductions in Inlet Temperature and Relative Humidity, Proceeding of the 9 th Thermal and Fluids Engineering Conference, American Society of Thermal and Fluids Engineers, Corvallis, OR, USA., April 21-24, 2024
Jones S and Languri E, Exploration of a Shape Factor to Increase Passive Radiative Cooling Rate, Proceeding of the 9th Thermal and Fluids Engineering Conference, American Society of Thermal and Fluids Engineers, Corvallis, OR, USA, April 21-24, 2024
Pourfallah M. and Languri E., Numerical Modeling of Thermal Management in Lithium Ion Battery with three novel configurations of separator plate, Proceeding of the 9 th Thermal and Fluids Engineering Conference, American Society of Thermal and Fluids Engineers, Corvallis, OR, USA, April 21-24, 2024
Noteworthy Feedback
"We really enjoyed your team’s visit and are very appreciative of your insight. I look forward to sharing news of our efficiency and optimization progress in... more"
- Source: Vickie Berry, Senior Manager, EHS, Brother, 2024-08-14
"I truly appreciate the work and dedication that your group put into the assessment and it was readily available for the real estate group to see the benefits... more"
- Source: Julie Duncan, HSE Advisor, 2024-08-30
"Great program you guys have and is really a great service to the Business Community. You guys should be proud of it!"
- Source: Ricky Woods, TBEI, 2023-12-14
Center Related News
September 4, 2019
Everyone Wins with Tennessee Tech University Industrial Assessment Center Program
Launched in 2006, the TTU-ITAC program provides manufacturers in the state with free energy, productivity, and waste assessments – including best practices for compressed air systems, and blowers and vacuum, as well as cooling towers and chillers. The assessments to date have provided manufacturers in the program with $27.48 million in recommended cost savings, equaling 3.82 trillion British thermal units of energy savings.
Assessment - Case Studies
Papers & Publications
2024
3 Papers / Publications
Nevills M. and Languri E., A Verification of Energy Savings in Air Compressors via Reductions in Inlet Temperature and Relative Humidity, Proceeding of the 9 th Thermal and Fluids Engineering Conference, American Society of Thermal and Fluids Engineers, Corvallis, OR, USA., April 21-24 | Tennessee Technological University ITAC
Jones S and Languri E, Exploration of a Shape Factor to Increase Passive Radiative Cooling Rate, Proceeding of the 9th Thermal and Fluids Engineering Conference, American Society of Thermal and Fluids Engineers, Corvallis, OR, USA, April 21-24 | Tennessee Technological University ITAC
Pourfallah M. and Languri E., Numerical Modeling of Thermal Management in Lithium Ion Battery with three novel configurations of separator plate, Proceeding of the 9 th Thermal and Fluids Engineering Conference, American Society of Thermal and Fluids Engineers, Corvallis, OR, USA, April 21-24 | Tennessee Technological University ITAC
2023
5 Papers / Publications
Abdel Zaro , Spencer Jones , Ethan Languri, Efficient Industrial Wastewater and Leachate Evaporation Utilizing Heat Localization in Porous Media, Journal of Energy and Power Technology | doi:http://dx.doi.org/10.21926/jept.2304035 | Tennessee Technological University ITAC
Swiecichowski P., Nevills M., Languri E., Davidson J., Costa L., Kerns D.,, Characterization of Functionalized Nanodiamonds in Mineral Oils for Transformer Applications, Proceeding of ASME International Mechanical Engineering Congress and Exposition,, New Orleans, Louisiana, USA, October 29-November 2 | doi:113527 | Tennessee Technological University ITAC
Jones S., Languri E.,, Energy Efficiency Improvement Through Pumping System Modeling and Analysis,, Proceeding of ASME International Mechanical Engineering Congress and Exposition, New Orleans, Louisiana, USA, October 29-November 2 | doi:113588 | Tennessee Technological University ITAC
Jones S., Languri E.,, Evaluating the Performance of Dry and Spray-Assisted Cooling Methods for Industrial Thermal Management Through Modeling and Experimental Data Validation,, Proceeding of ASME International Mechanical Engineering Congress and Exposition, New Orleans, Louisiana, USA, October 29-November 2 | doi:112349 | Tennessee Technological University ITAC
Oliver J., Languri E., Davidson J., Costa L., Kerns D., Thermal Characterization of Functionalized Nanodiamond Enhanced Phase Change Materials for Fast Response to Demand, Proceeding of ASME International Mechanical Engineering Congress and Exposition, New Orleans, Louisiana, USA, October 29-November 2 | doi:113540 | Tennessee Technological University ITAC
2022
6 Papers / Publications
Zaro A., Jaladi D., Languri E., Electric Redesign of Wastewater Evaporators using Porous Carbon Material to Minimize Heat Loss During Evaporation, The 7th Thermal and Fluids Engineering Conference (TFEC), Las Vegas, NV, April | Tennessee Technological University ITAC
Swiecichowski P. and Languri E., Energy Efficiency Improvement of Compressed Air Systems through Accurate Leak Flow Measurement Utilizing Acoustic Imaging Technology, The 7th Thermal and Fluids Engineering Conference (TFEC), Las Vegas, NV, April | Tennessee Technological University ITAC
Jones S. and Languri E., Validation of a Dynamic Model for Cooling Tower Energy Efficiency Analysis, The 7th Thermal and Fluids Engineering Conference (TFEC), Las Vegas, NV, April | Tennessee Technological University ITAC
Miles N., Taylor A., Cunningham G., Languri E., A Verification of Energy Savings in Air Compressors under Load/Unload Conditions Through Receiver Storage, The 7th Thermal and Fluids Engineering Conference (TFEC), Las Vegas, NV, April | Tennessee Technological University ITAC
Gholizadeh A., Pourfallah M., Gholinia M., Armin M., and Languri E., The role of nanofluids and fins in a heat exchanger on waste energy recovery from a diesel engine: An experimental and numerical study, Energy Reports, Volume 8, pages: 13353-13368. | doi:https://doi.org/10.1016/j.egyr.2022.10.009 | Tennessee Technological University ITAC
Prabhu V., Languri E., Davidson J., Kerns D., Costa L., Wilson G., Natural Convection Heat Transfer Enhancement using Functionalized Nanodiamonds in Transformer Oil, 2022 -, 21st IEEE Intersociety Conference on Thermal and Thermomechanical, Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITHERM), San Diego, California, USA, June 3 | Tennessee Technological University ITAC
2021
3 Papers / Publications
Hooper J., Languri E., Cunningham G., Guo W., A Modeling Tool to Analyze the Performance of Industrial Cooling Towers, Proceedings of the ASME IMECE 2021 International Mechanical Engineering Congress and Exposition IMECE 2021, November | Tennessee Technological University ITAC
Jaladi D., Pearce M., Van Neste C., Languri E., Near Field Resonant Capacitive Heating of Water, Proceedings of the ASME IMECE 2021 International Mechanical Engineering Congress and Exposition IMECE 2021, November | Tennessee Technological University ITAC
Zaro A., Jaladi D., Languri E., Electric Redesign of Wastewater Evaporators Using Porous Carbon Material to Minimize Heat Loss During Evaporation, Proceedings of the ASME IMECE 2021 International Mechanical Engineering Congress and Exposition IMECE 2021, November | Tennessee Technological University ITAC
2020
5 Papers / Publications
Mashali F. MS, Languri E., Davidson J., Kerns D., Diamond Nanofluids: Microstructural Analysis and Heat Transfer Study, Heat Transfer Engineering, Taylor & Francis, Volume 42, Pages 479-491, January 17 | Tennessee Technological University ITAC
Prabhu V., Languri E., Nawaz K., Experimental Validation of Mushy Zone Constant for Modeling of Solidification/Melting for Thermal Energy Storage Applications, Proceedings of the ASME 2020 International Mechanical Engineering Congress and Exposition IMECE 2020, November | Tennessee Technological University ITAC
Jaladi D., Languri E., Cunningham G., A Preliminary Study of Combined Heat and Power in a Facility, Proceedings of the ASME 2020 International Mechanical Engineering Congress and Exposition IMECE 2020, Portland, OR, USA, November | Tennessee Technological University ITAC
Bain A., Languri E., Padmanabhan V., Davidson J., Kerns D., Thermal Conductance of Nanoparticles: A Study of Phonon Transport in Functionalized Nanodiamond Suspensions, Proceedings of the ASME 2020 International Mechanical Engineering Congress and Exposition IMECE 2020, Portland, OR, USA, November 16- 19 | doi:https://doi.org/10.1115/IMECE2020-24384 | Tennessee Technological University ITAC
Bain A., Languri E., Davidson J., Kerns D., Costa L., Experimental Evaluation of Dielectric Oil Functionalized Nanodiamond Suspension Under Laminar Flow Regime, 2020 19th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), IEEE, Pages 276-282, Orlando, FL, USA, July 21 | doi:https://doi.org/10.1109/ITherm45881.2020.9190606 | Tennessee Technological University ITAC
2019
6 Papers / Publications
Ethan Languri and Glenn Cunningham, Thermal Energy Storage Systems, Advances in Sustainable Energy, Springer, April | Tennessee Technological University ITAC
Mashali F. MS, Languri E., Mirshekari G., Davidson J., Kerns D., Nanodiamond nanofluid microstructural and thermo-electrical characterization, International Communications in Heat and Mass Transfer, Volume 101, Pages 82-88, February | Tennessee Technological University ITAC
Mashali F. MS , Languri E., Davidson J., Kerns D., Branson B., Johnson W., Costa L., Lansford K.,, Particulate functionalized nanodiamond as a low concentration additive to liquid systems to enhance their thermal extraction capability, IEEE ITherm Conference, The Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, Las Vegas, Nevada, USA, May 28-31 | doi:http://dx.doi.org/10.1109/ITHERM.2019.8757386 | Tennessee Technological University ITAC
Mashali F. , Bain A. , Languri E., Davidson J., Kerns D., An Experimental- Statistical Study on Thermal Conductivity and viscosity of Diamond Nanofluids, 4 th Thermal and Fluids Engineering Conference, Las Vegas, Nevada, USA, April 14- 17 | Tennessee Technological University ITAC
Prabhu V. PhD , Languri E., Effect of Mushy Zone Constant in Solidification/Melting Model for PCM, 4th Thermal and Fluids Engineering Conference, Las Vegas, Nevada, USA, April 14-17 | Tennessee Technological University ITAC
Jaladi D. PhD , Languri E., Nawaz K., Evaporation inside Porous Medium under Heat Localization, 4th Thermal and Fluids Engineering Conference, Las Vegas, Nevada, USA, April 14-17 | Tennessee Technological University ITAC
2018
2 Papers / Publications
Bahraseman H, Languri E., A Numerical Modeling of Liquid-to-Vapor Phase Change inside a Porous Medium under Heat Localization, Heat Transfer Engineering, Volume 39, Issue 15 | Tennessee Technological University ITAC
Babazadehrokni, H., Languri, E., Flow of Microencapsulated Phase Change Material Slurry through Planar Spiral Coil, Heat Transfer Engineering, Volume 39, Issue 11 | Tennessee Technological University ITAC
2017
5 Papers / Publications
Rashidi, S., Akbarzadeh, M., Masoodi, R., Languri E., Thermal-hydraulic and Entrpy Generation Analysis for Tubulent Flow Inside a Corrugated Channel, International Journal of Heat and Mass Transfer, Volume 109, pp 812-823 | Tennessee Technological University ITAC
Bahraseman, H., East, J., Languri, E., Fast Charging of Thernal Energy Storage Systems Enabled by Phase Change Materials Mixed with Expanded Graphite, International Journal of Heat and Mass Transfer, Volume 109, pp 1052-1058 | Tennessee Technological University ITAC
Esfahani, M., Languri E., Exergy Analysis of a Shell-and-Tube Heat Exchanger using Graphene Oxide Nanofluids, Experimental Thermal and Fluid Science, Volume 83, pp. 100-106 | Tennessee Technological University ITAC
Taylor, A., Cunningham, G., Languri, E., Development of a Compressed Air Flow Meter Installed at the Compressor Inlet, The Industrial Energy Technology Conference, New Orleans, LA, June 20-22 | Tennessee Technological University ITAC
Patil, P., Languri, E., Cunningham, G., Welch A., Loftis, A., Role Variable Frequency Drives on Cooling Tower's Energy Saving, Proceedings of the 2nd Thermal and Fluid Engineering Conference, Las Vegas, NV, April 2-5 | Tennessee Technological University ITAC
2016
4 Papers / Publications
Ehsan Languri, Pallavi Patil, Glenn Cunningham, Albert Welch, Anthony Loftis, Dynamic Modeling and Experimental Analysis of Indeced Draft Cooling Tower, ASME Power and Energy Conference June 2016, Charlotte, NC, June | Tennessee Technological University ITAC
Ehsan Languri, Glenn Cunningham, Jie Cui, Stephen Idem, Feasibility Study of the Use of Ground-Coupled Condensers in Industrial Thermal Management, ASME Power and Energy Conference June 2016, Charlotte, NC | Tennessee Technological University ITAC
Hamidreza Ghasemi Bahraseman, Ehsan Languri, Numerical Modeling of Liquid-to-Vapor Phase Change in Porous Medium under Solar Heat Localization, ASME Power and Energy Conference June 2016, Charlotte, NC, June | Tennessee Technological University ITAC
M. Esfahani, E. Languri, Effect of Particle Size and Viscosity on Thermal Conductivity Enhancement of Graphene Oxide Nanofluid, International Communications in Heat and Mass Transfer, Vol 76, Pages 308-315, August | Tennessee Technological University ITAC
2015
4 Papers / Publications
H. Bahraseman, E. Languri, Numerical Modeling of Evaporation in Porous Media Flows, ASME IMECE, Houston Texas, November | Tennessee Technological University ITAC
H. Rokni, E. Languri, W. Johnson, Convective Electronic Device Cooling using Microencapsulated Phase Change Material Slurry in Planar Spiral Coil, ASME IMECE, Houston Texas, November | Tennessee Technological University ITAC
V. Prabhu, E. Languri, Numerical Modeling of Buoyancy-Driven Air Flow inside Irregular Tent Air Gap, Proceedings of the 1st Thermal and Fluid Engineering Summer Conference, TFESC, New York, New York, August | Tennessee Technological University ITAC
M. Nunna, E. Languri, Utilization of Graphene Oxide Nano Particles in the Base Fluid for Enhanced Heat Transfer Fluid - An Experimental Study, Tennessee Tech University Research Day, Cookeville, TN, April | Tennessee Technological University ITAC
Noteworthy Feedback
"We really enjoyed your team’s visit and are very appreciative of your insight. I look forward to sharing news of our efficiency and optimization progress in the coming year."
"We really enjoyed your team’s visit and are very appreciative of your insight. I look forward to sharing news of our efficiency and optimization progress in the coming year."
"We really enjoyed your team’s visit and are very appreciative of your insight. I look forward to sharing news of our efficiency and optimization progress in the coming year."
"We really enjoyed your team’s visit and are very appreciative of your insight. I look forward to sharing news of our efficiency and optimization progress in the coming year."
- Source: Vickie Berry, Senior Manager, EHS, Brother, 2024-08-14
"Thanks for your help we had a very successful first time Kaizen event on energy. Your assessment approach has helped us capture some great savings."
- Source: Craig Sommers, Division EHS Manager, Parker Hannifin, 2023-03-17
"Thank you TN Tech Team for the excellent report you have produced. I scanned the document and will review, in detail, all the measures and expect that they will be added to our "Roadmap" for the near future to be implemented."
"Thank you TN Tech Team for the excellent report you have produced. I scanned the document and will review, in detail, all the measures and expect that they will be added to our "Roadmap" for the near future to be implemented."
"Thank you TN Tech Team for the excellent report you have produced. I scanned the document and will review, in detail, all the measures and expect that they will be added to our "Roadmap" for the near future to be implemented."
"Thank you TN Tech Team for the excellent report you have produced. I scanned the document and will review, in detail, all the measures and expect that they will be added to our "Roadmap" for the near future to be implemented."
- Source: Mike Skroski, Energy Engineer, Chromalox, 2022-09-06
"It was a pleasure working with the students during the inspection. Their interest and energy were most appreciated. I have hope for the next generation of Tech engineers."
"It was a pleasure working with the students during the inspection. Their interest and energy were most appreciated. I have hope for the next generation of Tech engineers."
"It was a pleasure working with the students during the inspection. Their interest and energy were most appreciated. I have hope for the next generation of Tech engineers."
"It was a pleasure working with the students during the inspection. Their interest and energy were most appreciated. I have hope for the next generation of Tech engineers."
- Source: Don Haynes, Environmental Manager, Florim USA, 2020-10-08
"Energy Assessment Team,
I wanted to take a few moments to thank you all for the opportunity to work with you on the energy assessment at our Clinton, TN plant. The managers and employees here were very impressed with the way your team carried out their assignments. I look forward to seeing how all the data comes out and to using your recommendations as a roadmap to future energy savings."
"Energy Assessment Team,
I wanted to take a few moments to thank you all for the opportunity to work with you on the energy assessment at our Clinton, TN plant. The managers and employees here were very impressed with the way your team carried out their assignments. I look forward to seeing how all the data comes out and to using your recommendations as a roadmap to future energy savings."
"Energy Assessment Team,
I wanted to take a few moments to thank you all for the opportunity to work with you on the energy assessment at our Clinton, TN plant. The managers and employees here were very impressed with the way your team carried out their assignments. I look forward to seeing how all the data comes out and to using your recommendations as a roadmap to future energy savings."
"Energy Assessment Team,
I wanted to take a few moments to thank you all for the opportunity to work with you on the energy assessment at our Clinton, TN plant. The managers and employees here were very impressed with the way your team carried out their assignments. I look forward to seeing how all the data comes out and to using your recommendations as a roadmap to future energy savings."
- Source: John Humler, Maintenance & Tooling Manager, Nelson Global Products, 2016-01-13
"The work you guys helped us with has paid off. Thank you very much. I look forward to working with you guys in our new plant in the near future."
- Source: Chuck Moore, Maintenance Manager, Ficosa, 2015-08-26
"“The benefits we felt by working together with Tennessee Tech’s IAC group have been substantial. Dr. Glenn Cunningham and his team of graduate and undergraduate students brought an opportunistic attitude to our energy assessment, worked in a highly professional manner at all times and delivered a thorough analysis of our current condition, how we could improve and the potential cost savings from implementing their recommendations. We strongly encourage any eligible manufacturing site to take advantage of this program.†"
"“The benefits we felt by working together with Tennessee Tech’s IAC group have been substantial. Dr. Glenn Cunningham and his team of graduate and undergraduate students brought an opportunistic attitude to our energy assessment, worked in a highly professional manner at all times and delivered a thorough analysis of our current condition, how we could improve and the potential cost savings from implementing their recommendations. We strongly encourage any eligible manufacturing site to take advantage of this program.†"
"“The benefits we felt by working together with Tennessee Tech’s IAC group have been substantial. Dr. Glenn Cunningham and his team of graduate and undergraduate students brought an opportunistic attitude to our energy assessment, worked in a highly professional manner at all times and delivered a thorough analysis of our current condition, how we could improve and the potential cost savings from implementing their recommendations. We strongly encourage any eligible manufacturing site to take advantage of this program.†"
"“The benefits we felt by working together with Tennessee Tech’s IAC group have been substantial. Dr. Glenn Cunningham and his team of graduate and undergraduate students brought an opportunistic attitude to our energy assessment, worked in a highly professional manner at all times and delivered a thorough analysis of our current condition, how we could improve and the potential cost savings from implementing their recommendations. We strongly encourage any eligible manufacturing site to take advantage of this program.†"
- Source: Kyle Corbin, EHS Manager, ABC Inoac, 2015-06-11
"They [the team] did an amazing job yesterday. I'm very excited about the possibilities of their analysis."
- Source: Gavin Mabe, Clayton Homes, 2015-03-13
"I reviewed your report with our Board on Friday. They were sufficiently impressed that we would like to engage with IAC at our Monticello AR and Anderson SC plants. Thank you so much for the good work!"
"I reviewed your report with our Board on Friday. They were sufficiently impressed that we would like to engage with IAC at our Monticello AR and Anderson SC plants. Thank you so much for the good work!"
"I reviewed your report with our Board on Friday. They were sufficiently impressed that we would like to engage with IAC at our Monticello AR and Anderson SC plants. Thank you so much for the good work!"
"I reviewed your report with our Board on Friday. They were sufficiently impressed that we would like to engage with IAC at our Monticello AR and Anderson SC plants. Thank you so much for the good work!"
- Source: George McCabe, Board of Directors, Drew Foam, 2014-07-28
"- We just finished our lighting project in the plant. What a difference. More light, less kWh and a rebate from TVA. win, win, win. Professor Cunningham's team did a study in our facility which has been very beneficial. Thank you sir."
"- We just finished our lighting project in the plant. What a difference. More light, less kWh and a rebate from TVA. win, win, win. Professor Cunningham's team did a study in our facility which has been very beneficial. Thank you sir."
"- We just finished our lighting project in the plant. What a difference. More light, less kWh and a rebate from TVA. win, win, win. Professor Cunningham's team did a study in our facility which has been very beneficial. Thank you sir."
"- We just finished our lighting project in the plant. What a difference. More light, less kWh and a rebate from TVA. win, win, win. Professor Cunningham's team did a study in our facility which has been very beneficial. Thank you sir."
- Source: Michael Jackson, Engineer, Thomas and Betts, 2013-02-28
Contact Center
Center Director | Dr. Ethan Languri, PE, CEM, CBEP |
elanguri@tntech.edu | |
Phone # | 1 (931) 372-6790 |
Fax # | 1 (931) 372-6345 |
Mailing Address |
1020 Stadium Drive, Prescott Hall 233 Cookeville, TN 38505 |
Assistant Director | Hiyam Farhat |
Assistant Director | Jeffrey Marchetta, Ph.D. |
Other | Michelle Davis |
Tennessee Technological University has trained 238 students
The following students participated in ITAC assessments with Tennessee Technological University since
2007.
The 102 students (in BOLD) have also been awarded ITAC student certificates for exceptional participation.
The 102 students (in BOLD) have also been awarded ITAC student certificates for exceptional participation.
Aaron Cook |
Aaron Thomas Bain |
Aaron Willey |
Abby M Mink |
Adam Cunningham |
Aditya Jayanthi |
Adrian David McCann Lewis |
Albert Wilson |
Alejandro Pujol Pradillos |
Allison Muraski |
Amanda Rushing |
Amanda Winter |
Andrew Gordy |
Andrew Henson |
Andrew Rausch |
Ansar Ali |
Anthony Freeman |
Anthony Griffith |
Anthony Taylor |
Austin Estes |
Avery Stokes |
Ben Hassler |
Benjamin Runyon |
Blake Yancey |
Blakely Goans |
Bradley Beach |
Brandyn Hoffer |
Brian Ridley |
Brian Traylor |
Brianna Sullins |
Brodie Metcalf |
Brooks Goans |
Brooks Hayes |
Cameron TIngley |
Carl Groover |
Carlo Garcia |
Carlos Canelo |
Carlos Salvatierra |
Casey Potts |
Casey Tipton |
Chad Montgomery |
Chandler S Cain |
Charles Collier, Jr. |
Chase Ray |
Chris Loftis |
Chris Reedy |
Clay Paul |
Cody Bateman |
Collin Barlow |
Dakota Mays |
Dalton Bowen |
Damon Dowd |
Dan Brookshear (ETSU) |
Daniel Glover |
Daniel Kirkman |
Daniel Samoila |
David Clifford |
David Hinson |
David Pumroy |
David Rogers |
David Sierra |
David Ward |
David White |
Davin Strom |
Dean Sewell |
Dini Williams |
Douglas Uzcategui |
Douglas Williams |
Dustin Boyett |
Dylan Davis |
Dylan Mock |
Eddie Strickland (Memphis) |
Efat Mohammadi |
Elijah Gasmen |
Emily Hancock |
Emma Hughes |
Eric Ng |
Eric Pillow II |
Evan Kixmiller |
Garth Ghearing |
George Gulas |
Ghabros Messiha |
Grace Kimbro |
Gregory Stanford |
Grover Hickman |
Hannah Ross |
Harley Brown |
Henry Joure |
Herbert Yau |
Hollee Sadler |
Ian Brown |
Ian Swagerty |
Isaiah Triplett |
Jacob Barbee |
Jacob Bilbrey |
Jacob Burian |
Jake Jordan |
Jaladi Divyasusmitha |
James Leverette |
James Pratt III |