| Assessment Year | 2008 |
|---|---|
| Principal Product | Electrical Connectors |
| NAICS | 334417: Electronic Connector Manufacturing |
| SIC | 3643: Current-Carrying Wiring Devices |
| Sales Range | $10 M to 50M |
| # of Employees | 33 |
| Plant Area |
131,069
ft2
|
| Annual Production | 300,000
pieces
|
| Production Hrs. Annual | 6,110
hrs
|
| Location (State) | Pennsylvania |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $116,296 | 2,654,107 |
kWh
|
$0.044 |
| Electricity Demand | $56,309 | 7,519 |
kW-mo/yr
|
$7.49 |
| Electricity Fees | $4,958 | - |
|
- |
| Natural Gas | $102,393 | 12,340 |
MMBtu
|
$8.30 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $56,191 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $55,207 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $12,171 | $21,771 |
$8,763
199,987
kWh
|
$3,408
-
kW-mo/yr
|
- | |
| 02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $11,887 | $23,022 |
$8,659
197,600
kWh
|
$3,228
-
kW-mo/yr
|
- | |
| 03 | 2.2136: Install / repair insulation on steam lines | $7,524 | $5,130 |
$2,876
65,632
kWh
|
- |
$4,648
-
MMBtu
|
|
| 04 | 2.3191: Use demand controller or load shedder | $4,524 | $8,800 | - |
$4,524
-
kW-mo/yr
|
- | |
| 05 | 2.2414: Use waste heat from hot flue gases to preheat | $3,611 | $7,140 | - | - |
$3,611
-
MMBtu
|
|
| 06 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $3,318 | - |
$2,709
61,812
kWh
|
$609
-
kW-mo/yr
|
- | |
| 07 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $2,345 | - |
$1,708
38,978
kWh
|
$637
-
kW-mo/yr
|
- | |
| 08 | 2.4157: Establish a predictive maintenance program | $2,621 | $425 |
$2,142
48,888
kWh
|
$479
-
kW-mo/yr
|
- | |
| 09 | 2.4151: Develop a repair/replace policy | $1,750 | $1,363 |
$1,428
32,590
kWh
|
$322
-
kW-mo/yr
|
- | |
| 10 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $1,750 | $387 |
$1,428
32,590
kWh
|
$322
-
kW-mo/yr
|
- | |
| 11 | 2.4235: Remove or close off unneeded compressed air lines | $1,649 | - |
$1,259
28,730
kWh
|
$390
-
kW-mo/yr
|
- | |
| 12 | 2.4231: Reduce the pressure of compressed air to the minimum required | $984 | $52 |
$729
16,645
kWh
|
$255
-
kW-mo/yr
|
- | |
| 13 | 2.1233: Analyze flue gas for proper air/fuel ratio | $963 | $1,431 | - | - |
$963
-
MMBtu
|
|
| 14 | 2.4221: Install compressor air intakes in coolest locations | $610 | $196 |
$453
10,349
kWh
|
$157
-
kW-mo/yr
|
- | |
| 15 | 2.4239: Eliminate or reduce compressed air usage | $484 | $200 |
$394
8,986
kWh
|
$90
-
kW-mo/yr
|
- | |
| TOTAL RECOMMENDED | $56,191 | $69,917 |
$32,548
742,787
kWh
|
$14,421
-
kW-mo/yr
|
$9,222
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $55,207 | $69,865 |
$31,819
726,142
kWh
|
$14,166
-
kW-mo/yr
|
$9,222
-
MMBtu
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs