| Assessment Year | 1990 |
|---|---|
| Principal Product | BREAD AND ROLLS |
| NAICS |
n/a
|
| SIC | 2045: Prepared Flour Mixes and Doughs |
| Sales Range | $10 M to 50M |
| # of Employees | 400 |
| Plant Area |
n/a
|
| Annual Production | 0
units
|
| Production Hrs. Annual | 8,400
hrs
|
| Location (State) | Illinois |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $550,830 | 8,478,898 |
kWh
|
$0.065 |
| Natural Gas | $394,887 | 119,896 |
MMBtu
|
$3.29 |
| Other Energy | $108,000 | 11,250 |
MMBtu
|
$9.60 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $18,453 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $9,418 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Other Energy Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $9,418 | $1,203 |
$9,418
145,076
kWh
|
- | - | |
| 02 | 2.8223: Add air shields to trucks to increase fuel mileage | $3,240 | - | - | - |
$3,240
-
MMBtu
|
|
| 03 | 2.3132: Recharge batteries on during off-peak demand periods | $1,616 | $4,600 |
$1,616
-
kWh
|
- | - | |
| 04 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $892 | $1,955 |
$892
13,775
kWh
|
- | - | |
| 05 | 2.1233: Analyze flue gas for proper air/fuel ratio | $751 | $500 | - |
$751
-
MMBtu
|
- | |
| 06 | 2.4221: Install compressor air intakes in coolest locations | $2,126 | $4,000 |
$2,126
32,825
kWh
|
- | - | |
| 07 | 2.6232: Install set-back timers | $410 | $200 |
$410
6,448
kWh
|
- | - | |
| TOTAL RECOMMENDED | $18,453 | $12,458 |
$14,462
198,124
kWh
|
$751
-
MMBtu
|
$3,240
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $9,418 | $1,203 |
$9,418
145,076
kWh
|
- | - | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Other Energy Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs