Assessment Year | 1994 |
---|---|
Principal Product | Pickling and Galvanizing Steel Rolls |
NAICS |
n/a
|
SIC | 3479: Coating, Engraving, and Allied Services, Not Elsewhere Classified |
Sales Range | $10 M to 50M |
# of Employees | 100 |
Plant Area |
168,000
ft2
|
Annual Production | 375,000
ton
|
Production Hrs. Annual | 8,112
hrs
|
Location (State) | Michigan |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $556,530 | 8,021,102 |
kWh
|
$0.069 |
Natural Gas | $590,829 | 179,754 |
MMBtu
|
$3.29 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $98,607 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $29,030 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
---|---|---|---|---|---|---|
01 | 2.4133: Use most efficient type of electric motors | $28,560 | $49,340 |
$28,560
414,127
kWh
|
- | |
02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $12,804 | - |
$12,804
121,043
kWh
|
- | |
03 | 2.4221: Install compressor air intakes in coolest locations | $470 | $400 |
$470
6,741
kWh
|
- | |
04 | 2.6231: Utilize controls to operate equipment only when needed | $4,462 | $2,000 |
$4,462
67,409
kWh
|
- | |
05 | 2.2428: Use flue gases in radiant heater for space heating, ovens, etc | $52,311 | $39,200 | - |
$52,311
-
MMBtu
|
|
TOTAL RECOMMENDED | $98,607 | $90,940 |
$46,296
609,320
kWh
|
$52,311
-
MMBtu
|
||
TOTAL IMPLEMENTED | $29,030 | $49,740 |
$29,030
420,868
kWh
|
- |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs