| Assessment Year | 2004 |
|---|---|
| Principal Product | cement |
| NAICS | 327310: Cement Manufacturing |
| SIC | 3241: Cement, Hydraulic |
| Sales Range | $50 M to 100M |
| # of Employees | 115 |
| Plant Area |
250,000
ft2
|
| Annual Production | 1,300,000
ton
|
| Production Hrs. Annual | 8,760
hrs
|
| Location (State) | Florida |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $1,356,505 | 28,149,217 |
kWh
|
$0.048 |
| Coal | $624,564 | 205,450 |
MMBtu
|
$3.04 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $80,898 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $57,112 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Coal Savings | Solid Waste (haz) Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.6231: Utilize controls to operate equipment only when needed | $14,486 | $80,890 |
$14,486
301,712
kWh
|
- | - | |
| 02 | 2.4226: Use / purchase optimum sized compressor | $21,072 | $93,200 |
$21,072
407,424
kWh
|
- | - | |
| 03 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $3,438 | $478 |
$3,438
71,616
kWh
|
- | - | |
| 04 | 2.4231: Reduce the pressure of compressed air to the minimum required | $23,786 | - |
$23,786
495,540
kWh
|
- | - | |
| 05 | 2.4133: Use most efficient type of electric motors | $5,000 | $23,755 |
$5,000
104,160
kWh
|
- | - | |
| 06 | 4.515: Install shelves / racks to utilize unused space | $12,491 | $50,000 | - |
$12,491
-
MMBtu
|
- | |
| 07 | 3.5318: Recycle fluorescent lamps | $625 | $3,496 | - | - |
$625
-
lb
|
|
| TOTAL RECOMMENDED | $80,898 | $251,819 |
$67,782
1,380,452
kWh
|
$12,491
-
MMBtu
|
$625
-
lb
|
||
| TOTAL IMPLEMENTED | $57,112 | $251,819 |
$43,996
884,912
kWh
|
$12,491
-
MMBtu
|
$625
-
lb
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Coal Savings | Solid Waste (haz) Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs