| Assessment Year | 1985 |
|---|---|
| Principal Product | TITANIUM PRODUCTS |
| NAICS |
n/a
|
| SIC | 3356: Rolling, Drawing, and Extruding of Nonferrous Metals, Except Copper and Aluminum |
| Sales Range | $5 M to 10M |
| # of Employees | 177 |
| Plant Area |
n/a
|
| Annual Production | 2,000,000
lb
|
| Production Hrs. Annual | 4,675
hrs
|
| Location (State) | New Jersey |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $75,757 | 839,977 |
kWh
|
$0.090 |
| Natural Gas | $19,146 | 2,997 |
MMBtu
|
$6.39 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $17,273 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $7,491 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|
| 01 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $2,216 | $1,229 |
$2,216
24,619
kWh
|
- | |
| 02 | 2.6121: Reduce hot water temperature to the minimum required | $828 | - |
$645
7,034
kWh
|
$183
-
MMBtu
|
|
| 03 | 2.1311: Replace electrically-operated equipment with fossil fuel equipment | $581 | $370 |
$825
9,086
kWh
|
$(-244.0)
-
MMBtu
|
|
| 04 | 2.4221: Install compressor air intakes in coolest locations | $180 | $120 |
$180
2,052
kWh
|
- | |
| 05 | 2.2437: Recover waste heat from equipment | $1,280 | $500 | - |
$1,280
-
MMBtu
|
|
| 06 | 2.7261: Install timers and/or thermostats | $4,844 | $1,000 | - |
$4,844
-
MMBtu
|
|
| 07 | 2.7447: Install vinyl strip / high speed / air curtain doors | $359 | $41 | - |
$359
-
MMBtu
|
|
| 08 | 2.3191: Use demand controller or load shedder | $6,985 | $1,900 |
$6,985
-
kWh
|
- | |
| TOTAL RECOMMENDED | $17,273 | $5,160 |
$10,851
42,791
kWh
|
$6,422
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $7,491 | $1,661 |
$825
9,086
kWh
|
$6,666
-
MMBtu
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs