| Assessment Year | 1992 |
|---|---|
| Principal Product | LABORATORY INSTRUMENTS |
| NAICS |
n/a
|
| SIC | 3821: Laboratory Apparatus and Furniture |
| Sales Range | $10 M to 50M |
| # of Employees | 128 |
| Plant Area |
n/a
|
| Annual Production | 3,500
pieces
|
| Production Hrs. Annual | 2,600
hrs
|
| Location (State) | New Jersey |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $93,954 | 735,639 |
kWh
|
$0.13 |
| Natural Gas | $12,810 | 2,126 |
MMBtu
|
$6.03 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $14,083 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $621 | $79 |
$936
14,654
kWh
|
- | $(-315.0) | |
| 02 | 2.1233: Analyze flue gas for proper air/fuel ratio | $256 | $500 | - |
$256
-
MMBtu
|
- | |
| 03 | 2.7243: Improve air circulation with destratification fans / other methods | $1,643 | $3,420 |
$(-227.0)
(-1,758)
kWh
|
$1,870
-
MMBtu
|
- | |
| 04 | 2.6232: Install set-back timers | $3,358 | $956 |
$3,358
26,377
kWh
|
- | - | |
| 05 | 2.3191: Use demand controller or load shedder | $4,489 | $2,500 |
$4,489
-
kWh
|
- | - | |
| 06 | 2.4133: Use most efficient type of electric motors | $652 | $734 |
$652
4,982
kWh
|
- | - | |
| 07 | 2.4312: Improve lubrication practices | $1,624 | $800 |
$1,624
12,603
kWh
|
- | - | |
| 08 | 3.7214: Reduce or eliminate waste | $1,440 | $450 | - | - | $1,440 | |
| TOTAL RECOMMENDED | $14,083 | $9,439 |
$10,832
56,858
kWh
|
$2,126
-
MMBtu
|
$1,125 | ||
| TOTAL IMPLEMENTED | - | - | - | - | - | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs