| Assessment Year | 1992 |
|---|---|
| Principal Product | RUBBER, PLASTIC, METAL |
| NAICS |
n/a
|
| SIC | 3061: Molded, Extruded, and Lathe-Cut Mechanical Rubber Goods |
| Sales Range | $10 M to 50M |
| # of Employees | 188 |
| Plant Area |
n/a
|
| Annual Production | 10,000,000
pieces
|
| Production Hrs. Annual | 2,080
hrs
|
| Location (State) | New Jersey |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $132,606 | 1,163,834 |
kWh
|
$0.11 |
| Fuel Oil #2 | $124,966 | 24,562 |
MMBtu
|
$5.09 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $14,474 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Fuel Oil #2 Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $1,314 | $201 |
$1,718
14,947
kWh
|
- | $(-404.0) | |
| 02 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $912 | - |
$912
7,913
kWh
|
- | - | |
| 03 | 2.4221: Install compressor air intakes in coolest locations | $471 | $272 |
$471
4,103
kWh
|
- | - | |
| 04 | 2.1233: Analyze flue gas for proper air/fuel ratio | $10,885 | $500 | - |
$10,885
-
MMBtu
|
- | |
| 05 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $892 | $30 |
$892
7,913
kWh
|
- | - | |
| TOTAL RECOMMENDED | $14,474 | $1,003 |
$3,993
34,876
kWh
|
$10,885
-
MMBtu
|
$(-404.0) | ||
| TOTAL IMPLEMENTED | - | - | - | - | - | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs