ITAC Assessment: RU0126
ITAC logo
ITAC Assessment: RU0126
Grant Funding Opportunity NOW OPEN
Up to $300k at 50% cost share for qualifying* projects.
Grant Funding Opportunity Open
Qualifying* small and medium-sized US manufacturers, that received an ITAC, Onsite Energy/CHP TAP, or qualified equivalent assessment since 2018 can now apply for grants for implementation of assessment recommendations at up to 50% of qualifying* project costs with a maximum of $300,000 per grant.
IMPORTANT: The grant program now operates on a rolling basis and applications may be submitted at any time through the year, with quarterly reviews.
*See Full Grant Solicitation for full qualification and selection details.
Assessment Year 1991
Principal Product TRANSFORMERS
NAICS
n/a
SIC 3677: Electronic Coils, Transformers, and Other Inductors
Sales Range $10
M
to 50
M
# of Employees 150
Plant Area
n/a
Annual Production 1,500
pieces
Production Hrs. Annual 6,188
hrs
Location (State) New Jersey

Facility Energy Cost and Usage

Source Yearly Cost Usage
Electricity Usage $152,507 1,616,940
kWh
Natural Gas $13,938 2,344
MMBtu
Fuel Oil #2 $15,000 2,800
MMBtu
TOTAL YEARLY COSTS -
RECOMMENDED SAVINGS* $27,920 *Non-energy impacts included in savings.
IMPLEMENTED SAVINGS* $27,920

Recommendations

# Description Yearly Savings* Imp'd Cost* Status Electricity Usage Savings Natural Gas Savings
01 2.7142: Utilize higher efficiency lamps and/or ballasts $5,500 $717 $5,500
58,324
kWh
-
02 2.7111: Reduce illumination to minimum necessary levels $10,503 - $10,503
111,372
kWh
-
03 2.8114: Change rate schedules or other changes in utility service $6,998 $5,000 - $6,998
-
MMBtu
04 2.7251: Reduce air conditioning load by evaporating water from roof $2,736 $3,372 $2,736
29,015
kWh
-
05 2.2522: Isolate hot or cold equipment $2,183 $3,500 $2,183
23,154
kWh
-
TOTAL RECOMMENDED $27,920 $12,589 $20,922
221,865
kWh
$6,998
-
MMBtu
TOTAL IMPLEMENTED $27,920 $12,589 $20,922
221,865
kWh
$6,998
-
MMBtu
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs