| Assessment Year | 1991 |
|---|---|
| Principal Product | PLASTIC LIDS |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 200 |
| Plant Area |
n/a
|
| Annual Production | 300,000,000
pieces
|
| Production Hrs. Annual | 8,736
hrs
|
| Location (State) | New Jersey |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $937,607 | 12,861,958 |
kWh
|
$0.073 |
| Natural Gas | $3,084 | 510 |
MMBtu
|
$6.05 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $19,125 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $19,125 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings |
|---|---|---|---|---|---|
| 01 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $10,153 | - |
$10,153
139,215
kWh
|
|
| 02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $3,912 | $518 |
$3,912
53,341
kWh
|
|
| 03 | 2.4231: Reduce the pressure of compressed air to the minimum required | $3,681 | $700 |
$3,681
50,410
kWh
|
|
| 04 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $827 | $200 |
$827
11,430
kWh
|
|
| 05 | 2.4221: Install compressor air intakes in coolest locations | $552 | $135 |
$552
7,620
kWh
|
|
| TOTAL RECOMMENDED | $19,125 | $1,553 |
$19,125
262,016
kWh
|
||
| TOTAL IMPLEMENTED | $19,125 | $1,553 |
$19,125
262,016
kWh
|
||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs