| Assessment Year | 1985 |
|---|---|
| Principal Product | FABRICATED STEEL PRODUCT |
| NAICS |
n/a
|
| SIC | 3498: Fabricated Pipe and Pipe Fittings |
| Sales Range | $10 M to 50M |
| # of Employees | 252 |
| Plant Area |
n/a
|
| Annual Production | 5,280
ton
|
| Production Hrs. Annual | 3,000
hrs
|
| Location (State) | Texas |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $328,332 | 4,283,998 |
kWh
|
$0.077 |
| Natural Gas | $143,927 | 25,237 |
MMBtu
|
$5.70 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $71,762 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|
| 01 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $36,014 | $129 |
$36,014
470,106
kWh
|
- | |
| 02 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $15,526 | $27 | - |
$15,526
-
MMBtu
|
|
| 03 | 2.7231: Use radiant heater for spot heating | $1,012 | $4,800 | - |
$1,012
-
MMBtu
|
|
| 04 | 2.4133: Use most efficient type of electric motors | $616 | $1,181 |
$616
7,913
kWh
|
- | |
| 05 | 2.4221: Install compressor air intakes in coolest locations | $3,166 | $79 |
$3,166
41,325
kWh
|
- | |
| 06 | 2.4231: Reduce the pressure of compressed air to the minimum required | $15,428 | - |
$15,428
201,348
kWh
|
- | |
| TOTAL RECOMMENDED | $71,762 | $6,216 |
$55,224
720,692
kWh
|
$16,538
-
MMBtu
|
||
| TOTAL IMPLEMENTED | - | - | - | - | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs