| Assessment Year | 1988 |
|---|---|
| Principal Product | PROCESSED TUBING |
| NAICS |
n/a
|
| SIC | 3498: Fabricated Pipe and Pipe Fittings |
| Sales Range | $10 M to 50M |
| # of Employees | 167 |
| Plant Area |
n/a
|
| Annual Production | 75,000
ton
|
| Production Hrs. Annual | 6,000
hrs
|
| Location (State) | Oklahoma |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $148,805 | 2,681,419 |
kWh
|
$0.055 |
| Natural Gas | $179,814 | 87,550 |
MMBtu
|
$2.05 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $64,689 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $58,999 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.7261: Install timers and/or thermostats | $204 | $450 | - |
$204
-
MMBtu
|
- | |
| 02 | 2.4312: Improve lubrication practices | $2,711 | - |
$2,711
45,721
kWh
|
- | - | |
| 03 | 2.4133: Use most efficient type of electric motors | $1,364 | $901 |
$1,364
23,154
kWh
|
- | - | |
| 04 | 2.7111: Reduce illumination to minimum necessary levels | $1,423 | $15 |
$1,423
24,033
kWh
|
- | - | |
| 05 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $3,790 | $4,590 |
$3,759
63,306
kWh
|
- | $31 | |
| 06 | 2.7231: Use radiant heater for spot heating | $1,900 | $4,720 | - |
$1,900
-
MMBtu
|
- | |
| 07 | 2.8114: Change rate schedules or other changes in utility service | $53,297 | - |
$53,297
-
kWh
|
- | - | |
| TOTAL RECOMMENDED | $64,689 | $10,676 |
$62,554
156,214
kWh
|
$2,104
-
MMBtu
|
$31 | ||
| TOTAL IMPLEMENTED | $58,999 | $1,366 |
$58,795
92,908
kWh
|
$204
-
MMBtu
|
- | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs