| Assessment Year | 1993 |
|---|---|
| Principal Product | Special order plasma coa |
| NAICS |
n/a
|
| SIC | 3471: Electroplating, Plating, Polishing, Anodizing, and Coloring |
| Sales Range | $1 M to 5M |
| # of Employees | 48 |
| Plant Area |
27,000
ft2
|
| Annual Production | 0
units
|
| Production Hrs. Annual | 4,692
hrs
|
| Location (State) | Massachusetts |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $149,804 | 1,315,358 |
kWh
|
$0.11 |
| Fuel Oil #2 | $21,748 | 3,980 |
MMBtu
|
$5.46 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $18,091 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $11,082 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Fuel Oil #2 Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.6231: Utilize controls to operate equipment only when needed | $11,082 | $2,800 |
$11,082
97,304
kWh
|
- | - | |
| 02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $5,408 | $23,620 |
$5,408
47,479
kWh
|
- | - | |
| 03 | 2.7135: Install occupancy sensors | $567 | $170 |
$567
4,982
kWh
|
- | - | |
| 04 | 2.1311: Replace electrically-operated equipment with fossil fuel equipment | $(-3,869.0) | $18,000 |
$(-5,241.0)
(-46,014)
kWh
|
$1,372
-
MMBtu
|
- | |
| 05 | 2.7221: Lower temperature during the winter season and vice-versa | $2,266 | $143 | - | - |
$2,266
-
MMBtu
|
|
| 06 | 2.4221: Install compressor air intakes in coolest locations | $2,003 | $1,560 |
$2,003
17,585
kWh
|
- | - | |
| 07 | 2.4239: Eliminate or reduce compressed air usage | $634 | $68 |
$634
5,569
kWh
|
- | - | |
| TOTAL RECOMMENDED | $18,091 | $46,361 |
$14,453
126,905
kWh
|
$1,372
-
MMBtu
|
$2,266
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $11,082 | $2,800 |
$11,082
97,304
kWh
|
- | - | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Fuel Oil #2 Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs