| Assessment Year | 1992 |
|---|---|
| Principal Product | INJECT. MOLDED PLASTICS |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 155 |
| Plant Area |
n/a
|
| Annual Production | 21,000,000
lb
|
| Production Hrs. Annual | 7,728
hrs
|
| Location (State) | Massachusetts |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $988,288 | 13,745,311 |
kWh
|
$0.072 |
| Natural Gas | $40,661 | 6,371 |
MMBtu
|
$6.38 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $106,008 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|
| 01 | 2.2443: Re-use or recycle hot or cold process exhaust air | $45,335 | $164,025 |
$13,843
192,556
kWh
|
$31,492
-
MMBtu
|
|
| 02 | 2.6212: Turn off equipment during breaks, reduce operating time | $35,756 | - |
$35,756
497,362
kWh
|
- | |
| 03 | 2.6231: Utilize controls to operate equipment only when needed | $11,589 | $31,600 |
$11,589
161,196
kWh
|
- | |
| 04 | 2.2223: Enhance sensitivity of temperature control and cutoff | $9,355 | $29,200 |
$9,355
130,129
kWh
|
- | |
| 05 | 2.7447: Install vinyl strip / high speed / air curtain doors | $1,908 | $785 | - |
$1,908
-
MMBtu
|
|
| 06 | 2.2511: Insulate bare equipment | $1,285 | $320 |
$1,285
17,878
kWh
|
- | |
| 07 | 2.6232: Install set-back timers | $780 | $330 |
$780
10,844
kWh
|
- | |
| TOTAL RECOMMENDED | $106,008 | $226,260 |
$72,608
1,009,965
kWh
|
$33,400
-
MMBtu
|
||
| TOTAL IMPLEMENTED | - | - | - | - | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs