| Assessment Year | 1985 |
|---|---|
| Principal Product | GRAY IRON DUCT CASTINGS |
| NAICS |
n/a
|
| SIC | 3321: Gray and Ductile Iron Foundries |
| Sales Range | $5 M to 10M |
| # of Employees | 125 |
| Plant Area |
n/a
|
| Annual Production | 4,000
ton
|
| Production Hrs. Annual | 2,328
hrs
|
| Location (State) | Massachusetts |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $690,574 | 9,672,040 |
kWh
|
$0.071 |
| Natural Gas | $101,969 | 16,243 |
MMBtu
|
$6.28 |
| Fuel Oil #4 | $103,848 | 16,819 |
MMBtu
|
$6.17 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $34,541 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $34,541 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Fuel Oil #4 Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|---|---|
| 01 | 2.4321: Upgrade obsolete equipment | $11,304 | - | - |
$11,304
-
MMBtu
|
- | - | |
| 02 | 2.4221: Install compressor air intakes in coolest locations | $2,175 | $821 |
$2,175
30,481
kWh
|
- | - | - | |
| 03 | 2.2447: Heat water with exhaust heat | $1,144 | $2,804 | - | - |
$1,144
-
MMBtu
|
- | |
| 04 | 2.2113: Repair or replace steam traps | $16,278 | $715 | - | - |
$19,008
-
MMBtu
|
$(-2,730.0) | |
| 05 | 2.7261: Install timers and/or thermostats | $3,640 | $2,000 | - | - |
$3,640
-
MMBtu
|
- | |
| TOTAL RECOMMENDED | $34,541 | $6,340 |
$2,175
30,481
kWh
|
$11,304
-
MMBtu
|
$23,792
-
MMBtu
|
$(-2,730.0) | ||
| TOTAL IMPLEMENTED | $34,541 | $6,340 |
$2,175
30,481
kWh
|
$11,304
-
MMBtu
|
$23,792
-
MMBtu
|
$(-2,730.0) | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs