Assessment Year | 2022 |
---|---|
Principal Product | Oil Field Tools |
NAICS | 333132: Oil and Gas Field Machinery and Equipment Manufacturing |
SIC | 3533: Oil and Gas Field Machinery and Equipment |
Sales Range | less than $500 k |
# of Employees | 80 |
Plant Area |
342,511
ft2
|
Annual Production | 1
units
|
Production Hrs. Annual | 4,004
hrs
|
Location (State) | Louisiana |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $145,642 | 1,395,660 |
kWh
|
$0.10 |
Fuel Oil #2 | $46,715 | 1,945 |
MMBtu
|
$24.02 |
TOTAL YEARLY COSTS | $192,357 | |||
RECOMMENDED SAVINGS* | $50,436 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $23,256 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Fuel Oil #2 Savings |
---|---|---|---|---|---|---|
01 | 2.2694: Use highest temperature for chilling or cold storage | $378 | $10 |
$378
3,626
kWh
|
- | |
02 | 2.7261: Install timers and/or thermostats | $7,289 | $200 |
$7,289
69,845
kWh
|
- | |
03 | 2.4231: Reduce the pressure of compressed air to the minimum required | $651 | $50 |
$651
6,235
kWh
|
- | |
04 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $5,527 | $450 |
$5,527
52,968
kWh
|
- | |
05 | 2.7447: Install vinyl strip / high speed / air curtain doors | $975 | $240 |
$975
9,340
kWh
|
- | |
06 | 2.2414: Use waste heat from hot flue gases to preheat | $9,660 | $2,800 | - |
$9,660
-
MMBtu
|
|
07 | 2.7135: Install occupancy sensors | $304 | $114 |
$304
2,915
kWh
|
- | |
08 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $10,440 | $14,643 |
$10,440
100,048
kWh
|
- | |
09 | 2.9114: Use solar heat to make electricty | $15,212 | $215,340 |
$15,212
145,769
kWh
|
- | |
TOTAL RECOMMENDED | $50,436 | $233,847 |
$40,776
390,746
kWh
|
$9,660
-
MMBtu
|
||
TOTAL IMPLEMENTED | $23,256 | $15,293 |
$23,256
222,861
kWh
|
- | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Fuel Oil #2 Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs