| Assessment Year | 1993 |
|---|---|
| Principal Product | Cast Removal Systems |
| NAICS |
n/a
|
| SIC | 3842: Orthopedic, Prosthetic, and Surgical Appliances and Supplies |
| Sales Range | $10 M to 50M |
| # of Employees | 80 |
| Plant Area |
43,960
ft2
|
| Annual Production | 0
units
|
| Production Hrs. Annual | 2,860
hrs
|
| Location (State) | Kansas |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $40,502 | 472,157 |
kWh
|
$0.086 |
| Natural Gas | $34,543 | 6,403 |
MMBtu
|
$5.39 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $8,717 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $830 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.2437: Recover waste heat from equipment | $5,244 | $12,675 | - |
$5,244
-
MMBtu
|
- | |
| 02 | 2.7447: Install vinyl strip / high speed / air curtain doors | $1,461 | $2,079 | - |
$1,461
-
MMBtu
|
- | |
| 03 | 2.4231: Reduce the pressure of compressed air to the minimum required | $830 | $630 |
$830
9,672
kWh
|
- | - | |
| 04 | 2.4221: Install compressor air intakes in coolest locations | $226 | $113 |
$226
2,638
kWh
|
- | - | |
| 05 | 2.4231: Reduce the pressure of compressed air to the minimum required | $126 | $30 |
$126
1,465
kWh
|
- | - | |
| 06 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $427 | - |
$427
4,982
kWh
|
- | - | |
| 07 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $403 | $512 |
$151
1,758
kWh
|
- | $252 | |
| TOTAL RECOMMENDED | $8,717 | $16,039 |
$1,760
20,515
kWh
|
$6,705
-
MMBtu
|
$252 | ||
| TOTAL IMPLEMENTED | $830 | $630 |
$830
9,672
kWh
|
- | - | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs