| Assessment Year | 1992 |
|---|---|
| Principal Product | T-SHIRTS |
| NAICS |
n/a
|
| SIC | 2253: Knit Outerwear Mills |
| Sales Range | $10 M to 50M |
| # of Employees | 615 |
| Plant Area |
n/a
|
| Annual Production | 700,000
pieces
|
| Production Hrs. Annual | 8,592
hrs
|
| Location (State) | Kansas |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $275,361 | 3,291,618 |
kWh
|
$0.084 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $232,536 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $11,682 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | LPG Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|---|---|
| 01 | 2.3413: Burn fossil fuel to produce steam to drive a steam turbine-generator and use steam exhaust for heat | $180,344 | - |
$276,830
3,308,910
kWh
|
$(-46,852.0)
-
MMBtu
|
- | $(-49,634.0) | |
| 02 | 2.2449: Recover heat from exhausted steam, hot air or hot water | $20,311 | $10,200 | - |
$20,311
-
MMBtu
|
- | - | |
| 03 | 2.1393: Use steam sparging or injections in place of indirect heating | $8,568 | $9,570 | - |
$8,568
-
MMBtu
|
- | - | |
| 04 | 2.1331: Burn a less expensive grade of fuel | $4,504 | - | - |
$(-5,560.0)
-
MMBtu
|
$10,064
-
MMBtu
|
- | |
| 05 | 2.2414: Use waste heat from hot flue gases to preheat | $3,643 | $3,800 | - |
$3,643
-
MMBtu
|
- | - | |
| 06 | 2.2444: Use hot process fluids to preheat incoming process fluids | $3,635 | $5,600 | - |
$3,635
-
MMBtu
|
- | - | |
| 07 | 2.6232: Install set-back timers | $3,237 | $1,000 |
$3,237
38,687
kWh
|
- | - | - | |
| 08 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $1,430 | - |
$1,588
19,050
kWh
|
- | - | $(-158.0) | |
| 09 | 2.6232: Install set-back timers | $1,251 | $285 |
$1,251
14,947
kWh
|
- | - | - | |
| 10 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $711 | $891 |
$711
8,499
kWh
|
- | - | - | |
| 11 | 2.4221: Install compressor air intakes in coolest locations | $1,839 | $420 |
$1,839
21,981
kWh
|
- | - | - | |
| 12 | 2.2428: Use flue gases in radiant heater for space heating, ovens, etc | $1,696 | $1,250 |
$(-172.0)
(-2,052)
kWh
|
$1,868
-
MMBtu
|
- | - | |
| 13 | 2.2437: Recover waste heat from equipment | $1,013 | $2,973 | - |
$1,013
-
MMBtu
|
- | - | |
| 14 | 2.2511: Insulate bare equipment | $354 | $406 |
$354
41,618
kWh
|
- | - | - | |
| TOTAL RECOMMENDED | $232,536 | $36,395 |
$285,638
3,451,640
kWh
|
$(-13,374.0)
-
MMBtu
|
$10,064
-
MMBtu
|
$(-49,792.0) | ||
| TOTAL IMPLEMENTED | $11,682 | $5,470 |
$1,667
19,929
kWh
|
$(-49.0)
-
MMBtu
|
$10,064
-
MMBtu
|
- | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | LPG Savings | Administrative Changes Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs