ITAC Assessment: KU0132
ITAC logo
ITAC Assessment: KU0132
Grant Funding Opportunity NOW OPEN
Up to $300k at 50% cost share for qualifying* projects.
Grant Funding Opportunity Open
Qualifying* small and medium-sized US manufacturers, that received an ITAC, Onsite Energy/CHP TAP, or qualified equivalent assessment since 2018 can now apply for grants for implementation of assessment recommendations at up to 50% of qualifying* project costs with a maximum of $300,000 per grant.
IMPORTANT: The grant program now operates on a rolling basis and applications may be submitted at any time through the year, with quarterly reviews.
*See Full Grant Solicitation for full qualification and selection details.
Assessment Year 1984
Principal Product CUSTOM KITCHEN CABINETS
NAICS
n/a
SIC 2434: Wood Kitchen Cabinets
Sales Range $5
M
to 10
M
# of Employees 165
Plant Area
n/a
Annual Production 1,850
pieces
Production Hrs. Annual 2,300
hrs
Location (State) Kansas

Facility Energy Cost and Usage

Source Yearly Cost Usage
Electricity Usage $71,967 863,130
kWh
Natural Gas $13,650 2,665
MMBtu
Fuel Oil #1 $3,150 402
MMBtu
Other Energy $18,846 2,194
MMBtu
TOTAL YEARLY COSTS -
RECOMMENDED SAVINGS* $25,596 *Non-energy impacts included in savings.
IMPLEMENTED SAVINGS* $21,632

Recommendations

# Description Yearly Savings* Imp'd Cost* Status Electricity Usage Savings Natural Gas Savings Fuel Oil #1 Savings Other Energy Savings Administrative Changes Savings
01 2.7142: Utilize higher efficiency lamps and/or ballasts $8,142 $6,807 $8,142
97,597
kWh
- - - -
02 2.4312: Improve lubrication practices $3,765 $800 $3,765
45,135
kWh
- - - -
03 2.7447: Install vinyl strip / high speed / air curtain doors $3,978 $3,155 - $3,978
-
MMBtu
- - -
04 2.3191: Use demand controller or load shedder $1,907 $1,150 $1,907
-
kWh
- - - -
05 2.1233: Analyze flue gas for proper air/fuel ratio $903 - - $1,853
-
MMBtu
- - $(-950.0)
06 2.1123: Install automatic stack damper $840 $1,625 - $840
-
MMBtu
- - -
07 2.6214: Shut off pilots in standby equipment $238 - - $338
-
MMBtu
- - $(-100.0)
08 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves $1,443 $85 $1,443
17,292
kWh
- - - -
09 2.2449: Recover heat from exhausted steam, hot air or hot water $1,418 $1,110 $1,418
16,999
kWh
- - - -
10 2.4221: Install compressor air intakes in coolest locations $171 $50 $171
2,052
kWh
- - - -
11 2.7314: Reduce ventilation air $808 - $269
3,224
kWh
$1,039
-
MMBtu
- - $(-500.0)
12 2.6121: Reduce hot water temperature to the minimum required $954 - $954
11,430
kWh
- - - -
13 2.4322: Use or replace with energy efficient substitutes $662 - - - $95
-
MMBtu
$567
-
MMBtu
-
14 2.4322: Use or replace with energy efficient substitutes $367 $800 $367
4,396
kWh
- - - -
TOTAL RECOMMENDED $25,596 $15,582 $18,436
198,125
kWh
$8,048
-
MMBtu
$95
-
MMBtu
$567
-
MMBtu
$(-1,550.0)
TOTAL IMPLEMENTED $21,632 $12,757 $16,089
192,849
kWh
$5,831
-
MMBtu
$95
-
MMBtu
$567
-
MMBtu
$(-950.0)
Yearly Savings* Imp'd Cost* Electricity Usage Savings Natural Gas Savings Fuel Oil #1 Savings Other Energy Savings Administrative Changes Savings
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs