| Assessment Year | 1992 |
|---|---|
| Principal Product | WASHING MACHINE TRANSMISSIONS |
| NAICS |
n/a
|
| SIC | 3633: Household Laundry Equipment |
| Sales Range | $10 M to 50M |
| # of Employees | 203 |
| Plant Area |
n/a
|
| Annual Production | 934,000
pieces
|
| Production Hrs. Annual | 7,072
hrs
|
| Location (State) | Iowa |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $314,066 | 4,892,439 |
kWh
|
$0.064 |
| Natural Gas | $25,093 | 8,599 |
MMBtu
|
$2.92 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $19,292 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $19,292 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $4,595 | - |
$4,987
77,667
kWh
|
- | $(-392.0) | |
| 02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $846 | $1,980 |
$846
13,189
kWh
|
- | - | |
| 03 | 2.6232: Install set-back timers | $440 | $200 |
$440
6,741
kWh
|
- | - | |
| 04 | 2.4231: Reduce the pressure of compressed air to the minimum required | $4,364 | $8,000 |
$4,364
67,995
kWh
|
- | - | |
| 05 | 2.2437: Recover waste heat from equipment | $3,896 | $5,370 |
$(-489.0)
(-7,620)
kWh
|
$4,385
-
MMBtu
|
- | |
| 06 | 2.4221: Install compressor air intakes in coolest locations | $1,851 | $100 |
$1,851
28,722
kWh
|
- | - | |
| 07 | 2.4133: Use most efficient type of electric motors | $3,300 | $4,278 |
$3,300
51,290
kWh
|
- | - | |
| TOTAL RECOMMENDED | $19,292 | $19,928 |
$15,299
237,984
kWh
|
$4,385
-
MMBtu
|
$(-392.0) | ||
| TOTAL IMPLEMENTED | $19,292 | $19,928 |
$15,299
237,984
kWh
|
$4,385
-
MMBtu
|
$(-392.0) | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs