| Assessment Year | 1997 |
|---|---|
| Principal Product | Plastic injection molding |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $5 M to 10M |
| # of Employees | 100 |
| Plant Area |
28,000
ft2
|
| Annual Production | 1,000,000
lb
|
| Production Hrs. Annual | 5,760
hrs
|
| Location (State) | New York |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $200,977 | 1,894,490 |
kWh
|
$0.11 |
| Electricity Demand | $42,760 | 3,818 |
kW-mo/yr
|
$11.20 |
| Natural Gas | $6,090 | 580 |
MMBtu
|
$10.50 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $51,589 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $6,261 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings | Water Disposal Savings | Solid Waste (non-haz) Savings |
|---|---|---|---|---|---|---|---|---|---|
| 01 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $6,261 | $10,505 |
$5,051
44,256
kWh
|
$1,210
-
kW-mo/yr
|
- | - | - | |
| 02 | 2.4133: Use most efficient type of electric motors | $750 | $365 |
$750
6,448
kWh
|
- | - | - | - | |
| 03 | 2.4221: Install compressor air intakes in coolest locations | $1,003 | $800 |
$833
7,327
kWh
|
$170
-
kW-mo/yr
|
- | - | - | |
| 04 | 2.7447: Install vinyl strip / high speed / air curtain doors | $4,770 | $750 | - | - |
$4,770
-
MMBtu
|
- | - | |
| 05 | 2.6212: Turn off equipment during breaks, reduce operating time | $23,805 | - |
$23,805
206,038
kWh
|
- | - | - | - | |
| 06 | 3.6193: Install equipment (eg compactor) to reduce disposal costs | $12,000 | $6,500 | - | - | - | - |
$12,000
-
lb
|
|
| 07 | 3.4111: Use closed cycle process to minimize waste water production | $3,000 | $6,750 | - | - | - |
$3,000
-
Tgal
|
- | |
| TOTAL RECOMMENDED | $51,589 | $25,670 |
$30,439
264,069
kWh
|
$1,380
-
kW-mo/yr
|
$4,770
-
MMBtu
|
$3,000
-
Tgal
|
$12,000
-
lb
|
||
| TOTAL IMPLEMENTED | $6,261 | $10,505 |
$5,051
44,256
kWh
|
$1,210
-
kW-mo/yr
|
- | - | - | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings | Water Disposal Savings | Solid Waste (non-haz) Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs