Assessment Year | 1990 |
---|---|
Principal Product | EXTRUDED FIBERS |
NAICS |
n/a
|
SIC | 2299: Textile goods, Not Elsewhere Classified |
Sales Range | $10 M to 50M |
# of Employees | 200 |
Plant Area |
n/a
|
Annual Production | 15,000,000
lb
|
Production Hrs. Annual | 8,400
hrs
|
Location (State) | South Carolina |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $347,510 | 7,880,129 |
kWh
|
$0.044 |
Natural Gas | $59,954 | 13,151 |
MMBtu
|
$4.56 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $45,317 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $24,353 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
---|---|---|---|---|---|---|
01 | 2.7111: Reduce illumination to minimum necessary levels | $5,280 | - |
$5,280
121,630
kWh
|
- | |
02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $9,135 | $10,029 |
$9,135
210,434
kWh
|
- | |
03 | 2.4133: Use most efficient type of electric motors | $668 | $500 |
$668
15,533
kWh
|
- | |
04 | 2.4312: Improve lubrication practices | $2,000 | - |
$2,000
46,014
kWh
|
- | |
05 | 2.4231: Reduce the pressure of compressed air to the minimum required | $1,600 | $2,000 |
$1,600
36,049
kWh
|
- | |
06 | 2.4239: Eliminate or reduce compressed air usage | $5,500 | $500 |
$5,500
126,905
kWh
|
- | |
07 | 2.6231: Utilize controls to operate equipment only when needed | $2,200 | $1,600 |
$2,200
50,117
kWh
|
- | |
08 | 2.1221: Replace obsolete burners with more efficient ones | $3,250 | $7,000 | - |
$3,250
-
MMBtu
|
|
09 | 2.2614: Use cooling tower or economizer to replace chiller cooling | $15,684 | $11,000 |
$15,684
361,372
kWh
|
- | |
TOTAL RECOMMENDED | $45,317 | $32,629 |
$42,067
968,054
kWh
|
$3,250
-
MMBtu
|
||
TOTAL IMPLEMENTED | $24,353 | $21,629 |
$21,103
485,052
kWh
|
$3,250
-
MMBtu
|
||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs