Assessment Year | 1990 |
---|---|
Principal Product | STAINLESS STEEL FRAMES |
NAICS |
n/a
|
SIC | 3356: Rolling, Drawing, and Extruding of Nonferrous Metals, Except Copper and Aluminum |
Sales Range | $5 M to 10M |
# of Employees | 90 |
Plant Area |
n/a
|
Annual Production | 980,000
pieces
|
Production Hrs. Annual | 2,805
hrs
|
Location (State) | Georgia |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $37,431 | 461,899 |
kWh
|
$0.081 |
Natural Gas | $5,624 | 795 |
MMBtu
|
$7.07 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $6,159 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $5,520 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings |
---|---|---|---|---|---|
01 | 2.6232: Install set-back timers | $3,510 | - |
$3,510
43,376
kWh
|
|
02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $393 | $48 |
$393
4,982
kWh
|
|
03 | 2.6212: Turn off equipment during breaks, reduce operating time | $914 | - |
$914
11,137
kWh
|
|
04 | 2.4133: Use most efficient type of electric motors | $533 | $678 |
$533
6,448
kWh
|
|
05 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $639 | - |
$639
7,913
kWh
|
|
06 | 2.4221: Install compressor air intakes in coolest locations | $170 | $450 |
$170
2,052
kWh
|
|
TOTAL RECOMMENDED | $6,159 | $1,176 |
$6,159
75,908
kWh
|
||
TOTAL IMPLEMENTED | $5,520 | $1,176 |
$5,520
67,995
kWh
|
||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs