| Assessment Year | 1990 |
|---|---|
| Principal Product | SOFT DRINKS |
| NAICS |
n/a
|
| SIC | 2086: Bottled and Canned Soft Drinks and Carbonated Waters |
| Sales Range | $10 M to 50M |
| # of Employees | 74 |
| Plant Area |
n/a
|
| Annual Production | 5,500,000
pieces
|
| Production Hrs. Annual | 5,334
hrs
|
| Location (State) | Texas |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $176,276 | 2,786,049 |
kWh
|
$0.063 |
| Natural Gas | $45,314 | 11,216 |
MMBtu
|
$4.04 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $18,317 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $14,830 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|
| 01 | 2.2135: Repair and eliminate steam leaks | $10,825 | $1,000 | - |
$10,825
-
MMBtu
|
|
| 02 | 2.2414: Use waste heat from hot flue gases to preheat | $3,020 | $9,750 |
$(-5,720.0)
(-99,648)
kWh
|
$8,740
-
MMBtu
|
|
| 03 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $2,575 | $700 |
$2,575
63,599
kWh
|
- | |
| 04 | 2.2511: Insulate bare equipment | $640 | $370 |
$640
15,826
kWh
|
- | |
| 05 | 2.4221: Install compressor air intakes in coolest locations | $460 | $300 |
$460
11,430
kWh
|
- | |
| 06 | 2.3132: Recharge batteries on during off-peak demand periods | $330 | - |
$330
-
kWh
|
- | |
| 07 | 2.2511: Insulate bare equipment | $290 | $710 | - |
$290
-
MMBtu
|
|
| 08 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $37 | $27 |
$37
586
kWh
|
- | |
| 09 | 2.6232: Install set-back timers | $140 | - |
$140
3,517
kWh
|
- | |
| TOTAL RECOMMENDED | $18,317 | $12,857 |
$(-1,538.0)
(-4,690)
kWh
|
$19,855
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $14,830 | $2,370 |
$4,005
90,855
kWh
|
$10,825
-
MMBtu
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs