Assessment Year | 1989 |
---|---|
Principal Product | ROUGH & MILLED WOOD |
NAICS |
n/a
|
SIC | 2421: Sawmills and Planing Mills, General |
Sales Range | $10 M to 50M |
# of Employees | 60 |
Plant Area |
n/a
|
Annual Production | 8,000
thousand feet
|
Production Hrs. Annual | 2,000
hrs
|
Location (State) | Texas |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $97,693 | 1,322,978 |
kWh
|
$0.074 |
Natural Gas | $24,437 | 5,684 |
MMBtu
|
$4.30 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $10,115 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $5,915 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
---|---|---|---|---|---|---|---|
01 | 2.4322: Use or replace with energy efficient substitutes | $3,675 | $16,150 |
$3,675
50,410
kWh
|
- | - | |
02 | 2.8114: Change rate schedules or other changes in utility service | $2,860 | - |
$2,860
-
kWh
|
- | - | |
03 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $1,445 | $845 |
$830
11,723
kWh
|
- | $615 | |
04 | 2.6212: Turn off equipment during breaks, reduce operating time | $970 | - |
$970
22,274
kWh
|
- | - | |
05 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $430 | $300 |
$430
9,965
kWh
|
- | - | |
06 | 2.7261: Install timers and/or thermostats | $330 | $900 |
$210
4,982
kWh
|
$120
-
MMBtu
|
- | |
07 | 2.6232: Install set-back timers | $210 | - |
$210
4,982
kWh
|
- | - | |
08 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $195 | $250 |
$195
4,396
kWh
|
- | - | |
TOTAL RECOMMENDED | $10,115 | $18,445 |
$9,380
108,732
kWh
|
$120
-
MMBtu
|
$615 | ||
TOTAL IMPLEMENTED | $5,915 | $1,145 |
$5,300
48,944
kWh
|
- | $615 | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs