Assessment Year | 2002 |
---|---|
Principal Product | Furniture grade lumber |
NAICS |
n/a
|
SIC | 2491: Wood Preserving |
Sales Range | $5 M to 10M |
# of Employees | 54 |
Plant Area |
60,000
ft2
|
Annual Production | 13,000
thousand feet
|
Production Hrs. Annual | 4,000
hrs
|
Location (State) | West Virginia |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $118,971 | 2,185,920 |
kWh
|
$0.054 |
Natural Gas | $106,824 | 15,944 |
MMBtu
|
$6.70 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $118,584 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $13,467 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Other Liquid (haz) Savings | Personnel Changes Savings | One-time Revenue or Avoided Cost Savings |
---|---|---|---|---|---|---|---|---|---|
01 | 2.4221: Install compressor air intakes in coolest locations | $718 | $230 |
$718
13,081
kWh
|
- | - | - | - | |
02 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $4,500 | - |
$4,500
82,626
kWh
|
- | - | - | - | |
03 | 2.1233: Analyze flue gas for proper air/fuel ratio | $2,399 | $1,000 | - |
$2,399
-
MMBtu
|
- | - | - | |
04 | 2.7111: Reduce illumination to minimum necessary levels | $765 | $30 |
$765
14,080
kWh
|
- | - | - | - | |
05 | 2.6221: Use most efficient equipment at it's maximum capacity and less efficient equipment only when necessary | $4,266 | $300 |
$4,626
84,970
kWh
|
- | - | $(-360.0) | - | |
06 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $150 | - |
$150
4,576
kWh
|
- | - | - | - | |
07 | 2.2511: Insulate bare equipment | $1,387 | $188 | - |
$1,387
-
MMBtu
|
- | - | - | |
08 | 2.1224: Replace boiler | $65,563 | $100,000 | - |
$65,563
-
MMBtu
|
- | - | - | |
09 | 2.4231: Reduce the pressure of compressed air to the minimum required | $5,056 | $3,735 |
$5,056
92,881
kWh
|
- | - | - | - | |
10 | 3.6193: Install equipment (eg compactor) to reduce disposal costs | $900 | $665 | - | - |
$900
-
gal
|
- | - | |
11 | 4.632: Change operating conditions | $21,375 | $875 | - | - | - | - | $21,375 | |
12 | 4.126: Install sensors to detect defects | $11,505 | $13,600 | - | - | - | - | $11,505 | |
TOTAL RECOMMENDED | $118,584 | $120,623 |
$15,815
292,214
kWh
|
$69,349
-
MMBtu
|
$900
-
gal
|
$(-360.0) | $32,880 | ||
TOTAL IMPLEMENTED | $13,467 | $1,518 |
$10,041
186,252
kWh
|
$3,786
-
MMBtu
|
- | $(-360.0) | - | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Other Liquid (haz) Savings | Personnel Changes Savings | One-time Revenue or Avoided Cost Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs