Assessment Year | 1997 |
---|---|
Principal Product | Aluminum Oxides and Hydrates |
NAICS |
n/a
|
SIC | 3341: Secondary Smelting and Refining of Nonferrous Metals |
Sales Range | $10 M to 50M |
# of Employees | 40 |
Plant Area |
180,000
ft2
|
Annual Production | 120,000,000
lb
|
Production Hrs. Annual | 7,488
hrs
|
Location (State) | Pennsylvania |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $267,957 | 4,086,167 |
kWh
|
$0.066 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $601,093 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $96,820 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Administrative Changes Savings | Primary Raw Material Savings | Primary Product Savings |
---|---|---|---|---|---|---|---|---|
01 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $87,836 | $3,232 |
$87,836
1,339,390
kWh
|
- | - | - | |
02 | 2.7111: Reduce illumination to minimum necessary levels | $8,803 | $1,000 |
$8,803
134,232
kWh
|
- | - | - | |
03 | 2.4221: Install compressor air intakes in coolest locations | $273 | $212 |
$273
4,103
kWh
|
- | - | - | |
04 | 3.5217: Reuse / recycle/ sell paper products | $125 | - | - | $125 | - | - | |
05 | 3.1161: Eliminate/reduce an operation | $380,000 | $90,000 | - | - | - | $380,000 | |
06 | 3.5315: Lease / purchase baler; sell cardboard to recycler | $56 | - | - | $56 | - | - | |
07 | 4.441: Install automatic packing equipment | $20,000 | $90,000 | - | - | - | $20,000 | |
08 | 4.423: Move product using mechanical means | $104,000 | $3,000 | - | - | $104,000 | - | |
TOTAL RECOMMENDED | $601,093 | $187,444 |
$96,912
1,477,725
kWh
|
$181 | $104,000 | $400,000 | ||
TOTAL IMPLEMENTED | $96,820 | $4,232 |
$96,639
1,473,622
kWh
|
$181 | - | - | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Administrative Changes Savings | Primary Raw Material Savings | Primary Product Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs