Assessment Year | 1996 |
---|---|
Principal Product | Lumber Products |
NAICS |
n/a
|
SIC | 2421: Sawmills and Planing Mills, General |
Sales Range | $5 M to 10M |
# of Employees | 50 |
Plant Area |
45,000
ft2
|
Annual Production | 13,000
thousand feet
|
Production Hrs. Annual | 4,335
hrs
|
Location (State) | West Virginia |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $159,845 | 2,528,429 |
kWh
|
$0.063 |
Electricity Fees | $378 | - |
|
- |
Natural Gas | $39,180 | 7,261 |
MMBtu
|
$5.40 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $26,047 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $15,183 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
---|---|---|---|---|---|---|---|
01 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $61 | $43 |
$61
1,465
kWh
|
- | - | |
02 | 2.4133: Use most efficient type of electric motors | $833 | $3,726 |
$833
19,343
kWh
|
- | - | |
03 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $5,048 | $3,200 |
$5,048
117,233
kWh
|
- | - | |
04 | 2.4131: Size electric motors for peak operating efficiency | $10,600 | $16,000 |
$10,600
246,483
kWh
|
- | - | |
05 | 2.4221: Install compressor air intakes in coolest locations | $84 | $210 |
$84
1,758
kWh
|
- | - | |
06 | 2.4314: Use synthetic lubricant | $357 | $350 |
$357
11,723
kWh
|
- | - | |
07 | 2.2136: Install / repair insulation on steam lines | $264 | $220 | - |
$264
-
MMBtu
|
- | |
08 | 3.5313: Increase amount of waste recovered for resale | $8,800 | - | - | - | $8,800 | |
TOTAL RECOMMENDED | $26,047 | $23,749 |
$16,983
398,005
kWh
|
$264
-
MMBtu
|
$8,800 | ||
TOTAL IMPLEMENTED | $15,183 | $7,529 |
$6,383
151,522
kWh
|
- | $8,800 | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs