Assessment Year | 1993 |
---|---|
Principal Product | Decorated Glass |
NAICS |
n/a
|
SIC | 3231: Glass Products, Made of Purchased Glass |
Sales Range | $5 M to 10M |
# of Employees | 135 |
Plant Area |
110,000
ft2
|
Annual Production | 0
units
|
Production Hrs. Annual | 2,080
hrs
|
Location (State) | West Virginia |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $154,183 | 2,150,938 |
kWh
|
$0.072 |
Natural Gas | $171,828 | 50,153 |
MMBtu
|
$3.43 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $36,107 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $36,107 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
---|---|---|---|---|---|---|
01 | 2.2437: Recover waste heat from equipment | $320 | $244 | - |
$320
-
MMBtu
|
|
02 | 2.4221: Install compressor air intakes in coolest locations | $375 | $180 |
$375
13,775
kWh
|
- | |
03 | 2.7243: Improve air circulation with destratification fans / other methods | $2,363 | $2,400 | - |
$2,363
-
MMBtu
|
|
04 | 2.2428: Use flue gases in radiant heater for space heating, ovens, etc | $2,285 | $1,392 | - |
$2,285
-
MMBtu
|
|
05 | 2.2511: Insulate bare equipment | $2,233 | $1,371 | - |
$2,233
-
MMBtu
|
|
06 | 2.2511: Insulate bare equipment | $29 | $23 | - |
$29
-
MMBtu
|
|
07 | 2.2511: Insulate bare equipment | $1,327 | $850 | - |
$1,327
-
MMBtu
|
|
08 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $332 | $1,450 |
$332
12,309
kWh
|
- | |
09 | 2.4133: Use most efficient type of electric motors | $160 | $6,080 |
$160
5,862
kWh
|
- | |
10 | 3.1192: Reduce scrap production | $26,683 | - |
$26,683
-
kWh
|
- | |
TOTAL RECOMMENDED | $36,107 | $13,990 |
$27,550
31,946
kWh
|
$8,557
-
MMBtu
|
||
TOTAL IMPLEMENTED | $36,107 | $13,990 |
$27,550
31,946
kWh
|
$8,557
-
MMBtu
|
||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs