| Assessment Year | 2015 |
|---|---|
| Principal Product | Wood/Lumber |
| NAICS | 321113: Sawmills |
| SIC | 2421: Sawmills and Planing Mills, General |
| Sales Range | $10 M to 50M |
| # of Employees | 39 |
| Plant Area |
56,000
ft2
|
| Annual Production | 17,000
thousand feet
|
| Production Hrs. Annual | 2,550
hrs
|
| Location (State) | Wisconsin |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $145,099 | 1,915,600 |
kWh
|
$0.076 |
| Electricity Demand | $70,016 | 8,752 |
kW-mo/yr
|
$8.00 |
| Electricity Fees | $20,003 | - |
|
- |
| Natural Gas | $1,235 | 98 |
MMBtu
|
$12.66 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $21,066 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Water Disposal Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.4231: Reduce the pressure of compressed air to the minimum required | $7,117 | - |
$4,754
62,762
kWh
|
$2,363
-
kW-mo/yr
|
- | |
| 02 | 2.4224: Upgrade controls on compressors | $7,544 | $15,210 |
$5,538
73,108
kWh
|
$2,006
-
kW-mo/yr
|
- | |
| 03 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $2,119 | $8,723 |
$2,119
30,978
kWh
|
- | - | |
| 04 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $2,228 | $1,530 |
$1,488
19,645
kWh
|
$740
-
kW-mo/yr
|
- | |
| 05 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $1,401 | $520 |
$1,029
13,577
kWh
|
$372
-
kW-mo/yr
|
- | |
| 06 | 3.4155: Meter waste water | $658 | $750 | - | - |
$658
-
Tgal
|
|
| TOTAL RECOMMENDED | $21,066 | $26,733 |
$14,927
200,070
kWh
|
$5,481
-
kW-mo/yr
|
$658
-
Tgal
|
||
| TOTAL IMPLEMENTED | - | - | - | - | - | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | Water Disposal Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs