Assessment Year | 1990 |
---|---|
Principal Product | ENVELOPES & LETTERHEAD |
NAICS |
n/a
|
SIC | 2759: Commercial Printing, Not Elsewhere Classified |
Sales Range | $10 M to 50M |
# of Employees | 250 |
Plant Area |
n/a
|
Annual Production | 3,500,000
pieces
|
Production Hrs. Annual | 6,000
hrs
|
Location (State) | Illinois |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $292,082 | 3,882,474 |
kWh
|
$0.075 |
Natural Gas | $76,150 | 14,017 |
MMBtu
|
$5.43 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $47,121 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $37,322 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
---|---|---|---|---|---|---|---|
01 | 2.8113: Purchase gas directly from a contract gas supplier | $32,758 | - | - |
$32,758
-
MMBtu
|
- | |
02 | 2.2414: Use waste heat from hot flue gases to preheat | $7,722 | $10,000 | - |
$7,722
-
MMBtu
|
- | |
03 | 2.6218: Turn off equipment when not in use | $1,752 | $1,600 | - |
$1,752
-
MMBtu
|
- | |
04 | 2.7494: Install storm windows and doors | $1,672 | $2,640 | - |
$1,672
-
MMBtu
|
- | |
05 | 2.1233: Analyze flue gas for proper air/fuel ratio | $1,274 | $500 | - |
$1,474
-
MMBtu
|
$(-200.0) | |
06 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $1,098 | - |
$1,098
14,654
kWh
|
- | - | |
07 | 2.3132: Recharge batteries on during off-peak demand periods | $520 | $1,250 |
$520
-
kWh
|
- | - | |
08 | 2.6232: Install set-back timers | $325 | $400 |
$325
4,396
kWh
|
- | - | |
TOTAL RECOMMENDED | $47,121 | $16,390 |
$1,943
19,050
kWh
|
$45,378
-
MMBtu
|
$(-200.0) | ||
TOTAL IMPLEMENTED | $37,322 | $4,390 |
$1,618
14,654
kWh
|
$35,904
-
MMBtu
|
$(-200.0) | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs