| Assessment Year | 2017 |
|---|---|
| Principal Product | Injection Molded Automotive Assemblies |
| NAICS | 326199: All Other Plastics Product Manufacturing |
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $50 M to 100M |
| # of Employees | 210 |
| Plant Area |
150,000
ft2
|
| Annual Production | 42,913,338
pieces
|
| Production Hrs. Annual | 6,000
hrs
|
| Location (State) | Michigan |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $441,512 | 8,843,946 |
kWh
|
$0.050 |
| Electricity Demand | $395,865 | 20,650 |
kW-mo/yr
|
$19.17 |
| Natural Gas | $41,083 | 7,362 |
MMBtu
|
$5.58 |
| TOTAL YEARLY COSTS | $878,460 | |||
| RECOMMENDED SAVINGS* | $23,236 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings |
|---|---|---|---|---|---|---|
| 01 | 2.4231: Reduce the pressure of compressed air to the minimum required | $2,972 | $3,000 |
$1,682
33,648
kWh
|
$1,290
-
kW-mo/yr
|
|
| 02 | 2.4322: Use or replace with energy efficient substitutes | $2,383 | $300 |
$2,383
47,659
kWh
|
- | |
| 03 | 2.4221: Install compressor air intakes in coolest locations | $931 | $1,500 |
$931
18,614
kWh
|
- | |
| 04 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $14,992 | $8,978 |
$8,415
168,300
kWh
|
$6,577
-
kW-mo/yr
|
|
| 05 | 2.7135: Install occupancy sensors | $1,958 | $2,400 |
$1,958
39,168
kWh
|
- | |
| TOTAL RECOMMENDED | $23,236 | $16,178 |
$15,369
307,389
kWh
|
$7,867
-
kW-mo/yr
|
||
| TOTAL IMPLEMENTED | - | - | - | - | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs