| Assessment Year | 2016 |
|---|---|
| Principal Product | Plastic Injection Molding for Automotive Components |
| NAICS | 326199: All Other Plastics Product Manufacturing |
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $100 M to 500M |
| # of Employees | 500 |
| Plant Area |
67,400
ft2
|
| Annual Production | 1
pieces
|
| Production Hrs. Annual | 8,112
hrs
|
| Location (State) | Michigan |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $355,856 | 6,843,387 |
kWh
|
$0.052 |
| Natural Gas | $57,574 | 7,873 |
MMBtu
|
$7.31 |
| TOTAL YEARLY COSTS | $413,430 | |||
| RECOMMENDED SAVINGS* | $18,996 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|
| 01 | 2.4221: Install compressor air intakes in coolest locations | $3,893 | $2,000 |
$3,893
74,874
kWh
|
- | |
| 02 | 2.4322: Use or replace with energy efficient substitutes | $13,012 | $5,000 |
$13,012
250,226
kWh
|
- | |
| 03 | 2.7135: Install occupancy sensors | $1,272 | $2,500 |
$1,272
24,461
kWh
|
- | |
| 04 | 2.2414: Use waste heat from hot flue gases to preheat | $819 | $3,700 | - |
$819
-
MMBtu
|
|
| TOTAL RECOMMENDED | $18,996 | $13,200 |
$18,177
349,561
kWh
|
$819
-
MMBtu
|
||
| TOTAL IMPLEMENTED | - | - | - | - | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs