| Assessment Year | 2012 |
|---|---|
| Principal Product | structural foam plastic products |
| NAICS | 326199: All Other Plastics Product Manufacturing |
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 125 |
| Plant Area |
358,614
ft2
|
| Annual Production | 30,000,000
lb
|
| Production Hrs. Annual | 6,000
hrs
|
| Location (State) | Michigan |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $675,617 | 10,743,543 |
kWh
|
$0.063 |
| Natural Gas | $40,076 | 6,381 |
MMBtu
|
$6.28 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $42,278 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $35,085 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings |
|---|---|---|---|---|---|
| 01 | 2.4221: Install compressor air intakes in coolest locations | $1,538 | $1,500 |
$1,538
24,409
kWh
|
|
| 02 | 2.7135: Install occupancy sensors | $5,655 | $21,250 |
$5,655
89,760
kWh
|
|
| 03 | 2.2614: Use cooling tower or economizer to replace chiller cooling | $34,019 | $5,000 |
$34,019
540,000
kWh
|
|
| 04 | 3.4156: Use flow control valves on equipment to optimize water use | $1,066 | $448 |
$1,066
16,920
kWh
|
|
| TOTAL RECOMMENDED | $42,278 | $28,198 |
$42,278
671,089
kWh
|
||
| TOTAL IMPLEMENTED | $35,085 | $5,448 |
$35,085
556,920
kWh
|
||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs