Assessment Year | 1999 |
---|---|
Principal Product | Plastic Injection Molding |
NAICS |
n/a
|
SIC | 3089: Plastics Products, Not Elsewhere Classified |
Sales Range | $5 M to 10M |
# of Employees | 100 |
Plant Area |
25,000
ft2
|
Annual Production | 36,000,000
pieces
|
Production Hrs. Annual | 8,400
hrs
|
Location (State) | Michigan |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $101,237 | 2,466,295 |
kWh
|
$0.041 |
Electricity Demand | $47,253 | 4,140 |
kW-mo/yr
|
$11.41 |
Electricity Fees | $6,763 | - |
|
- |
Natural Gas | $8,391 | 1,523 |
MMBtu
|
$5.51 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $40,263 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | - |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Electricity Fees Savings | Solid Waste (haz) Savings | Primary Product Savings |
---|---|---|---|---|---|---|---|---|---|
01 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $3,736 | $220 |
$1,935
55,393
kWh
|
$1,801
-
kW-mo/yr
|
- | - | - | |
02 | 2.4221: Install compressor air intakes in coolest locations | $78 | $200 |
$53
1,465
kWh
|
$25
-
kW-mo/yr
|
- | - | - | |
03 | 2.2511: Insulate bare equipment | $2,510 | $200 |
$1,655
47,479
kWh
|
$855
-
kW-mo/yr
|
- | - | - | |
04 | 2.8114: Change rate schedules or other changes in utility service | $15,807 | $40,000 | - | - | $15,807 | - | - | |
05 | 3.7131: Use a rag recycle service | $925 | - | - | - | - |
$925
-
lb
|
- | |
06 | 4.424: Improve space comfort conditioning | $6,000 | $3,600 | - | - | - | - | $6,000 | |
07 | 4.111: Add equipment/ operators to reduce production bottleneck | $11,207 | $40,000 | - | - | - | - | $11,207 | |
TOTAL RECOMMENDED | $40,263 | $84,220 |
$3,643
104,337
kWh
|
$2,681
-
kW-mo/yr
|
$15,807 |
$925
-
lb
|
$17,207 | ||
TOTAL IMPLEMENTED | - | - | - | - | - | - | - | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | Electricity Fees Savings | Solid Waste (haz) Savings | Primary Product Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs