| Assessment Year | 1999 |
|---|---|
| Principal Product | Injection Molded Plastics |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 120 |
| Plant Area |
60,000
ft2
|
| Annual Production | 70,000,000
lb
|
| Production Hrs. Annual | 6,732
hrs
|
| Location (State) | Indiana |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $146,473 | 4,024,619 |
kWh
|
$0.036 |
| Electricity Demand | $35,923 | 10,276 |
kW-mo/yr
|
$3.50 |
| Natural Gas | $6,052 | 922 |
MMBtu
|
$6.56 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $726,637 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings | Solid Waste (non-haz) Savings | Administrative Changes Savings | One-time Revenue or Avoided Cost Savings |
|---|---|---|---|---|---|---|---|---|---|---|
| 01 | 2.7111: Reduce illumination to minimum necessary levels | $710 | $101 |
$606
16,706
kWh
|
$104
-
kW-mo/yr
|
- | - | - | - | |
| 02 | 2.7261: Install timers and/or thermostats | $263 | - | - | - |
$263
-
MMBtu
|
- | - | - | |
| 03 | 3.7198: Reduce / eliminate use of disposable product | $844 | $930 | - | - | - |
$844
-
lb
|
- | - | |
| 04 | 3.6193: Install equipment (eg compactor) to reduce disposal costs | $3,000 | $8,500 | - | - | - | - | $3,000 | - | |
| 05 | 4.515: Install shelves / racks to utilize unused space | $721,820 | $48,180 | - | - | - | - | - | $721,820 | |
| TOTAL RECOMMENDED | $726,637 | $57,711 |
$606
16,706
kWh
|
$104
-
kW-mo/yr
|
$263
-
MMBtu
|
$844
-
lb
|
$3,000 | $721,820 | ||
| TOTAL IMPLEMENTED | - | - | - | - | - | - | - | - | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs