| Assessment Year | 1998 |
|---|---|
| Principal Product | Injection Molded Plastic, Plastic Appliance Parts |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 250 |
| Plant Area |
220,000
ft2
|
| Annual Production | 5,000,000
pieces
|
| Production Hrs. Annual | 8,592
hrs
|
| Location (State) | Kentucky |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $300,982 | 12,145,663 |
kWh
|
$0.025 |
| Electricity Demand | $244,027 | 23,200 |
kW-mo/yr
|
$10.52 |
| Electricity Fees | $1,722 | - |
|
- |
| Natural Gas | $42,362 | 8,366 |
MMBtu
|
$5.06 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $228,379 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $99,499 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Solid Waste (non-haz) Savings | Primary Product Savings |
|---|---|---|---|---|---|---|---|---|
| 01 | 2.3212: Optimize plant power factor | $67,516 | - | - |
$67,516
-
kW-mo/yr
|
- | - | |
| 02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $3,803 | - |
$2,128
97,011
kWh
|
$1,675
-
kW-mo/yr
|
- | - | |
| 03 | 3.5313: Increase amount of waste recovered for resale | $28,180 | - | - | - |
$28,180
-
lb
|
- | |
| 04 | 4.446: Automate finishing process | $128,880 | - | - | - | - | $128,880 | |
| TOTAL RECOMMENDED | $228,379 | - |
$2,128
97,011
kWh
|
$69,191
-
kW-mo/yr
|
$28,180
-
lb
|
$128,880 | ||
| TOTAL IMPLEMENTED | $99,499 | - |
$2,128
97,011
kWh
|
$69,191
-
kW-mo/yr
|
$28,180
-
lb
|
- | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs