| Assessment Year | 1994 |
|---|---|
| Principal Product | Plastic |
| NAICS |
n/a
|
| SIC | 3081: Unsupported Plastics Film and Sheet |
| Sales Range | $5 M to 10M |
| # of Employees | 50 |
| Plant Area |
37,500
ft2
|
| Annual Production | 5,000,000
lb
|
| Production Hrs. Annual | 5,950
hrs
|
| Location (State) | Florida |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $149,825 | 2,327,081 |
kWh
|
$0.064 |
| Other Energy | $30,406 | 4,274 |
MMBtu
|
$7.11 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $110,104 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $8,944 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Primary Product Savings |
|---|---|---|---|---|---|---|
| 01 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $2,610 | $5,358 |
$2,610
38,687
kWh
|
- | |
| 02 | 2.7135: Install occupancy sensors | $165 | $228 |
$165
3,810
kWh
|
- | |
| 03 | 2.4133: Use most efficient type of electric motors | $3,247 | $1,883 |
$3,247
51,583
kWh
|
- | |
| 04 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $3,087 | $1,100 |
$3,087
48,945
kWh
|
- | |
| 05 | 2.4226: Use / purchase optimum sized compressor | $496 | $1,200 |
$496
5,862
kWh
|
- | |
| 06 | 4.631: Install an uninteruptable power supply | $100,000 | $8,200 | - | $100,000 | |
| 07 | 2.2136: Install / repair insulation on steam lines | $499 | $244 |
$499
20,809
kWh
|
- | |
| TOTAL RECOMMENDED | $110,104 | $18,213 |
$10,104
169,696
kWh
|
$100,000 | ||
| TOTAL IMPLEMENTED | $8,944 | $8,341 |
$8,944
139,215
kWh
|
- | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Primary Product Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs