| Assessment Year | 1985 |
|---|---|
| Principal Product | DECO APPLIANCE TRIMS |
| NAICS |
n/a
|
| SIC | 3442: Metal Doors, Sash, Frames, Molding, and Trim Manufacturing |
| Sales Range | $10 M to 50M |
| # of Employees | 249 |
| Plant Area |
n/a
|
| Annual Production | 0
units
|
| Production Hrs. Annual | 4,500
hrs
|
| Location (State) | Ohio |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $174,004 | 3,135,991 |
kWh
|
$0.055 |
| Natural Gas | $146,213 | 23,993 |
MMBtu
|
$6.09 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $10,316 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $2,466 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|
| 01 | 2.2437: Recover waste heat from equipment | $1,705 | $1,260 | - |
$1,705
-
MMBtu
|
|
| 02 | 2.2136: Install / repair insulation on steam lines | $434 | $280 | - |
$434
-
MMBtu
|
|
| 03 | 2.2414: Use waste heat from hot flue gases to preheat | $7,850 | $18,000 | - |
$7,850
-
MMBtu
|
|
| 04 | 2.4221: Install compressor air intakes in coolest locations | $327 | $240 |
$327
5,862
kWh
|
- | |
| TOTAL RECOMMENDED | $10,316 | $19,780 |
$327
5,862
kWh
|
$9,989
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $2,466 | $1,780 |
$327
5,862
kWh
|
$2,139
-
MMBtu
|
||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs