| Assessment Year | 1982 |
|---|---|
| Principal Product | CUSTOM PLASTIC MOLDERS |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 207 |
| Plant Area |
n/a
|
| Annual Production | 0
units
|
| Production Hrs. Annual | 6,000
hrs
|
| Location (State) | Ohio |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $89,926 | 1,659,730 |
kWh
|
$0.054 |
| Natural Gas | $600 | 138 |
MMBtu
|
$4.35 |
| LPG | $4,310 | 458 |
MMBtu
|
$9.41 |
| Fuel Oil #2 | $14,269 | 1,821 |
MMBtu
|
$7.84 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $13,152 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $729 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|
| 01 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $935 | $380 |
$1,090
20,809
kWh
|
$(-155.0)
-
MMBtu
|
|
| 02 | 2.4221: Install compressor air intakes in coolest locations | $729 | $700 |
$729
13,482
kWh
|
- | |
| 03 | 2.3131: Reschedule plant operations or reduce load to avoid peaks | $11,488 | $5,000 |
$11,488
126,612
kWh
|
- | |
| TOTAL RECOMMENDED | $13,152 | $6,080 |
$13,307
160,903
kWh
|
$(-155.0)
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $729 | $700 |
$729
13,482
kWh
|
- | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs