| Assessment Year | 1996 |
|---|---|
| Principal Product | Plastics Additives and Specialty Chemicals |
| NAICS |
n/a
|
| SIC | 2869: Industrial Organic Chemicals, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 39 |
| Plant Area |
39,600
ft2
|
| Annual Production | 12,000,000
lb
|
| Production Hrs. Annual | 8,736
hrs
|
| Location (State) | South Carolina |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $258,725 | 6,468,054 |
kWh
|
$0.040 |
| Other Energy | $188,644 | 39,956 |
MMBtu
|
$4.72 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $54,470 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $455 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Other Energy Savings | Primary Raw Material Savings | Ancillary Material Cost Savings |
|---|---|---|---|---|---|---|---|---|
| 01 | 3.5311: Recover and reuse waste material | $25,995 | $6,250 | - | - | $25,995 | - | |
| 02 | 2.4146: Use adjustable frequency drive or multiple speed motors on existing system | $20,270 | $23,940 |
$20,270
506,741
kWh
|
- | - | - | |
| 03 | 2.7261: Install timers and/or thermostats | $2,790 | $1,000 |
$2,790
69,754
kWh
|
- | - | - | |
| 04 | 2.2163: Use minimum steam operating pressure | $2,360 | $2,600 | - |
$2,360
-
MMBtu
|
- | - | |
| 05 | 2.4231: Reduce the pressure of compressed air to the minimum required | $2,600 | - |
$2,600
65,064
kWh
|
- | - | - | |
| 06 | 2.7124: Make a practice of turning off lights when not needed | $455 | - |
$430
10,844
kWh
|
- | - | $25 | |
| TOTAL RECOMMENDED | $54,470 | $33,790 |
$26,090
652,403
kWh
|
$2,360
-
MMBtu
|
$25,995 | $25 | ||
| TOTAL IMPLEMENTED | $455 | - |
$430
10,844
kWh
|
- | - | $25 | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Other Energy Savings | Primary Raw Material Savings | Ancillary Material Cost Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs