| Assessment Year | 1991 |
|---|---|
| Principal Product | CARPET PRODUCING MACHINE |
| NAICS |
n/a
|
| SIC | 3552: Textile Machinery |
| Sales Range | $10 M to 50M |
| # of Employees | 150 |
| Plant Area |
n/a
|
| Annual Production | 60
pieces
|
| Production Hrs. Annual | 4,845
hrs
|
| Location (State) | Tennessee |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $80,327 | 1,242,087 |
kWh
|
$0.065 |
| Natural Gas | $10,834 | 1,922 |
MMBtu
|
$5.64 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $28,537 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|
| 01 | 2.7123: Keep lamps and reflectors clean | $13,070 | $35,200 |
$13,070
201,055
kWh
|
- | |
| 02 | 2.7231: Use radiant heater for spot heating | $3,646 | $10,080 | - |
$3,646
-
MMBtu
|
|
| 03 | 2.6232: Install set-back timers | $3,696 | - |
$3,696
56,858
kWh
|
- | |
| 04 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $855 | $1,600 | - |
$855
-
MMBtu
|
|
| 05 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $2,010 | - |
$2,010
46,307
kWh
|
- | |
| 06 | 2.7121: Utilize daylight whenever possible in lieu of artificial light | $1,372 | $3,285 |
$1,372
21,102
kWh
|
- | |
| 07 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $3,145 | $1,476 |
$3,145
48,359
kWh
|
- | |
| 08 | 2.7122: Disconnect ballasts | $476 | - |
$476
7,327
kWh
|
- | |
| 09 | 2.4312: Improve lubrication practices | $267 | - |
$267
4,103
kWh
|
- | |
| TOTAL RECOMMENDED | $28,537 | $51,641 |
$24,036
385,111
kWh
|
$4,501
-
MMBtu
|
||
| TOTAL IMPLEMENTED | - | - | - | - | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs