| Assessment Year | 1984 |
|---|---|
| Principal Product | DIE CASTINGS |
| NAICS |
n/a
|
| SIC | 3363: Aluminum Die-Castings |
| Sales Range | $5 M to 10M |
| # of Employees | 80 |
| Plant Area |
n/a
|
| Annual Production | 3,000,000
lb
|
| Production Hrs. Annual | 0
hrs
|
| Location (State) | Tennessee |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $65,395 | 2,000,879 |
kWh
|
$0.033 |
| Natural Gas | $131,000 | 23,293 |
MMBtu
|
$5.62 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $52,622 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $52,372 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|
| 01 | 2.1233: Analyze flue gas for proper air/fuel ratio | $25,155 | $12,500 | - |
$25,155
-
MMBtu
|
|
| 02 | 2.2511: Insulate bare equipment | $18,357 | $750 | - |
$18,357
-
MMBtu
|
|
| 03 | 2.2414: Use waste heat from hot flue gases to preheat | $8,215 | $21,000 | - |
$8,215
-
MMBtu
|
|
| 04 | 2.6232: Install set-back timers | $645 | - |
$645
25,791
kWh
|
- | |
| 05 | 2.2511: Insulate bare equipment | $250 | $78 |
$250
9,965
kWh
|
- | |
| TOTAL RECOMMENDED | $52,622 | $34,328 |
$895
35,756
kWh
|
$51,727
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $52,372 | $34,250 |
$645
25,791
kWh
|
$51,727
-
MMBtu
|
||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs