| Assessment Year | 2013 |
|---|---|
| Principal Product | Printed Circuits |
| NAICS | 334412: Bare Printed Circuit Board Manufacturing |
| SIC | 3672: Printed Circuit Boards |
| Sales Range | $100 M to 500M |
| # of Employees | 900 |
| Plant Area |
570,141
ft2
|
| Annual Production | 10,000
pieces
|
| Production Hrs. Annual | 6,240
hrs
|
| Location (State) | New York |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $585,849 | 9,657,191 |
kWh
|
$0.061 |
| Other Energy | $280,325 | 31,703 |
MMBtu
|
$8.84 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $109,960 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $1,766 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Personnel Changes Savings | One-time Revenue or Avoided Cost Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.4226: Use / purchase optimum sized compressor | $72,807 | $28,851 |
$(-15,928.0)
(-262,838)
kWh
|
- | $88,735 | |
| 02 | 3.1161: Eliminate/reduce an operation | $12,570 | $7,200 |
$(-710.0)
(-11,700)
kWh
|
$2,352 | $10,928 | |
| 03 | 2.4133: Use most efficient type of electric motors | $14,121 | $10,392 |
$14,121
233,016
kWh
|
- | - | |
| 04 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $1,766 | $1,320 | - | - | $1,766 | |
| 05 | 2.4321: Upgrade obsolete equipment | $1,180 | $5,512 |
$1,180
19,469
kWh
|
- | - | |
| 06 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $7,516 | $37,508 |
$5,415
89,352
kWh
|
$1,296 | $805 | |
| TOTAL RECOMMENDED | $109,960 | $90,783 |
$4,078
67,299
kWh
|
$3,648 | $102,234 | ||
| TOTAL IMPLEMENTED | $1,766 | $1,320 | - | - | $1,766 | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Personnel Changes Savings | One-time Revenue or Avoided Cost Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs