Assessment Year | 2006 |
---|---|
Principal Product | Lumber |
NAICS | 321113: Sawmills |
SIC | 2421: Sawmills and Planing Mills, General |
Sales Range | $10 M to 50M |
# of Employees | 80 |
Plant Area |
60,000
ft2
|
Annual Production | 12,000
thousand feet
|
Production Hrs. Annual | 2,600
hrs
|
Location (State) | Pennsylvania |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $136,703 | 3,449,840 |
kWh
|
$0.040 |
Electricity Demand | $63,214 | 12,216 |
kW-mo/yr
|
$5.17 |
Electricity Fees | $61,177 | - |
|
- |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $418,583 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $16,363 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | One-time Revenue or Avoided Cost Savings |
---|---|---|---|---|---|---|---|
01 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $4,554 | - |
$2,851
71,292
kWh
|
$1,703
-
kW-mo/yr
|
- | |
02 | 2.4231: Reduce the pressure of compressed air to the minimum required | $3,404 | - |
$1,743
43,593
kWh
|
$1,661
-
kW-mo/yr
|
- | |
03 | 2.4314: Use synthetic lubricant | $2,489 | - |
$1,557
38,922
kWh
|
$932
-
kW-mo/yr
|
- | |
04 | 3.1182: Make a new by-product | $402,220 | $41,000 | - | - | $402,220 | |
05 | 2.4221: Install compressor air intakes in coolest locations | $1,989 | $42 |
$1,006
25,155
kWh
|
$983
-
kW-mo/yr
|
- | |
06 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $2,230 | $850 |
$1,397
34,918
kWh
|
$833
-
kW-mo/yr
|
- | |
07 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $1,697 | $10,420 |
$1,060
26,494
kWh
|
$637
-
kW-mo/yr
|
- | |
TOTAL RECOMMENDED | $418,583 | $52,312 |
$9,614
240,374
kWh
|
$6,749
-
kW-mo/yr
|
$402,220 | ||
TOTAL IMPLEMENTED | $16,363 | $11,312 |
$9,614
240,374
kWh
|
$6,749
-
kW-mo/yr
|
- | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | One-time Revenue or Avoided Cost Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs