| Assessment Year | 2004 |
|---|---|
| Principal Product | Powdered Metal Products |
| NAICS | 332117: Powder Metallurgy Part Manufacturing |
| SIC | 3399: Primary Metal Products, Not Elsewhere Classified |
| Sales Range | $5 M to 10M |
| # of Employees | 44 |
| Plant Area |
46,275
ft2
|
| Annual Production | 75,000,000
pieces
|
| Production Hrs. Annual | 6,240
hrs
|
| Location (State) | Pennsylvania |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $126,999 | 2,897,400 |
kWh
|
$0.044 |
| Electricity Demand | $29,370 | 6,474 |
kW-mo/yr
|
$4.54 |
| Natural Gas | $74,033 | 13,544 |
MMBtu
|
$5.47 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $28,431 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $22,286 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Personnel Changes Savings | One-time Revenue or Avoided Cost Savings |
|---|---|---|---|---|---|---|---|---|
| 01 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $50 | - |
$30
684
kWh
|
$20
-
kW-mo/yr
|
- | - | |
| 02 | 2.4222: Install adequate dryers on air lines to eliminate blowdown | $19,192 | $4,348 | - | - | $9,192 | $10,000 | |
| 03 | 3.4145: Use magnetic technology to treat water | $2,160 | $939 | - | - | $1,920 | $240 | |
| 04 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $934 | $434 |
$779
17,784
kWh
|
$155
-
kW-mo/yr
|
- | - | |
| 05 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $6,095 | $13,007 |
$5,083
116,064
kWh
|
$1,012
-
kW-mo/yr
|
- | - | |
| TOTAL RECOMMENDED | $28,431 | $18,728 |
$5,892
134,532
kWh
|
$1,187
-
kW-mo/yr
|
$11,112 | $10,240 | ||
| TOTAL IMPLEMENTED | $22,286 | $5,721 |
$779
17,784
kWh
|
$155
-
kW-mo/yr
|
$11,112 | $10,240 | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs