| Assessment Year | 2003 |
|---|---|
| Principal Product | Heat Transfer Equipment |
| NAICS | 333415: Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipmen |
| SIC | 3440: |
| Sales Range | $10 M to 50M |
| # of Employees | 295 |
| Plant Area |
250,000
ft2
|
| Annual Production | 100
pieces
|
| Production Hrs. Annual | 6,240
hrs
|
| Location (State) | New York |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $353,731 | 5,035,200 |
kWh
|
$0.070 |
| Electricity Demand | $189,813 | 14,395 |
kW-mo/yr
|
$13.19 |
| Electricity Fees | $11,337 | - |
|
- |
| Natural Gas | $250,256 | 35,253 |
MMBtu
|
$7.10 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $165,224 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $106,157 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings | Water Disposal Savings |
|---|---|---|---|---|---|---|---|---|
| 01 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $57,642 | $93,355 |
$41,266
589,513
kWh
|
$16,376
-
kW-mo/yr
|
- | - | |
| 02 | 2.2492: Use "heat wheel" or other heat exchanger to cross-exchange building exhaust air with make-up air | $42,094 | $93,819 | - | - |
$42,094
-
MMBtu
|
- | |
| 03 | 2.2121: Increase amount of condensate returned | $30,876 | $11,602 | - | - |
$25,071
-
MMBtu
|
$5,805
-
Tgal
|
|
| 04 | 2.7491: Insulate glazing, walls, ceilings, and roofs | $12,993 | $7,176 | - | - |
$12,993
-
MMBtu
|
- | |
| 05 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $5,229 | $438 |
$5,229
74,706
kWh
|
- | - | - | |
| 06 | 2.3212: Optimize plant power factor | $5,043 | $16,501 | - |
$5,043
-
kW-mo/yr
|
- | - | |
| 07 | 3.4111: Use closed cycle process to minimize waste water production | $4,900 | $16,700 | - | - | - |
$4,900
-
Tgal
|
|
| 08 | 2.2414: Use waste heat from hot flue gases to preheat | $3,098 | $12,105 | - | - |
$3,098
-
MMBtu
|
- | |
| 09 | 2.4239: Eliminate or reduce compressed air usage | $2,467 | $163 |
$2,467
35,247
kWh
|
- | - | - | |
| 10 | 2.4221: Install compressor air intakes in coolest locations | $882 | $249 | - | - |
$882
-
MMBtu
|
- | |
| TOTAL RECOMMENDED | $165,224 | $252,108 |
$48,962
699,466
kWh
|
$21,419
-
kW-mo/yr
|
$84,138
-
MMBtu
|
$10,705
-
Tgal
|
||
| TOTAL IMPLEMENTED | $106,157 | $138,759 |
$48,962
699,466
kWh
|
$21,419
-
kW-mo/yr
|
$25,071
-
MMBtu
|
$10,705
-
Tgal
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings | Water Disposal Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs